Sony PDW-70MD страница 68 Скачать руководство пользователя

Страница: 68 / 92

System Menu

Cha

r 6

nu
s

Press the

/OUT button.

The setup menu

(see page 68)

or the disc menu

(see

page 74)

appears.

Setup Menu

The setup menu has three levels.
The top level shows a general classification of the setting
items in the menu. Except for MENU GRADE, the actual
setting items are found on the second or third level.
Setting items are divided into basic items, which are
needed for normal operations, and enhanced items, which
are needed for enhanced operations.
When the unit is shipped from the factory, the setup menu
is configured to display basic items only. To display
enhanced items as well, change the setting of the MENU
GRADE item.

Setup Menu Items

The purpose and settings of the setup menu items are
described below.
• Brackets [ ] indicate characters and symbols that appear

in the time data display section.

• An asterisk (*) (for example *EE) indicates that a setting

is the factory default.

SETUP MENU

OPERATIONAL FUNCTION

DISPLAY CONTROL
SETUP BANK OPERATION

MENU GRADE :BASIC

OPERATIONAL FUNCTION [Operational]: Operation
settings

Description

LOCAL ENABLE [> Local ENA]:

Select the buttons that can

be operated on this unit even when the remote control
switch is set to REMOTE.

ALL DISABLE [>> All DIS]:

The EJECT button and the

buttons in the recording/playback control block cannot be
operated.

STOP & EJECT [>> STOP&EJ]:

Only the STOP button and

EJECT button can be operated.

ALL ENABLE [>> All ENA]:

The EJECT button and all of the

buttons in the recording/playback control block can be
operated. The preroll time can be set and time data can be
selected on this unit.

REC FORMAT [> REC format]:

Select the recording format

(MPEG-2 compression rate).

HQ [>> HQ]:

35Mbps

SP [>> SP]:

25Mbps

LP [>> LP]:

18Mbps

DISC END [> Disc End]:

Select what the unit should do when

the free disc capacity is exhausted during recording.

GOTO TOP [>> GOTO TOP]:

Move to the top of the disc.

END STOP [>> END STOP]:

Stop at the end of the disc.

EJECT [>> EJECT]:

Eject the disc automatically.

CLIP TITLE [> Clip Title]:

Specify how to assign clip
titles.

AUTO TITLE [>> AT Title]:

Select whether to assign
clip titles automatically.

DISABLE [>>> DISABLE]:

Do not assign.

ENABLE [>>> ENABLE]:

Assign.

TITLE [>> Title]:

Assign

arbitrary titles.

The CLIP AUTO TITLING screen appears.

For details, see “To assign clip titles” (page 47) in Chapter 4.

FILE NAMING [> File Name]:

Specify the clip and clip
list name format

NAMING FORM [>> Name

Form]:

Specify the clip

and clip list name format.

C**** [>>> C****]:

Standard format

free [>>> free]:

Enable free format.

AUTO NAMING [>> AT

Naming]:

Specify the

format of the file names
generated when clips are
recorded.

C**** [>>> C****]:

Standard format

title [>>> title]:

Assign the same name as clip title.

Содержание PDW-70MD





























































































Результаты поиска

Содержание PDW-70MD

Отзывы:

Похожие инструкции для PDW-70MD

Бренды по названию

Популярные бренды

Sony PDW-70MD, Инструкция по эксплуатации

Результаты поиска

Содержание PDW-70MD

Отзывы:

Похожие инструкции для PDW-70MD

Бренды по названию

Популярные бренды