Sony PDW-70MD, Инструкция по эксплуатации

Страница: 50 / 92

50
Creating Clip Lists
Cha
p
te
r 4
S
c
e
ne Sel
e
c
tio
n
2
Press the MENU button.
The CLIP menu appears (see page 58) .
(If no clip list is loaded in the current clip list, a screen
as shown in step
3 appears.)
3
Use the
M
/MARK1 or
m
/MARK2 button to select
LOAD CLIP LIST, and then press the SET button.
A clip list selection screen appears.
For an already created clip list, the details including
the creation date appear, and for an empty clip list,
“NEW FILE
” appears.
To select the type of clip list information to display
Press the
b
/OUT button.
Each press of the button switches the display in the
order Date >Title >Name.
The following informantion is displayed for display
item types:
+DATE: Date and time when the clip list was created
or last modified
+TITLE: Title assigned to the clip list
+NAME: Name of the clip list, or a user-defined name
You can use the supplied PDZ-1 Proxy Browsing
Software to assign titles to clip lists.
4
Use the
M
/MARK1 or
m
/MARK2 button to select a
clip list number such as E0001, and then press the SET
button.
This returns to the thumbnail screen.
5
Press the SUB CLIP button.
The clip list window appears.
If you selected NEW FILE in step
4
, the display shows
the state with no clips loaded as shown below.
Select NEW FILE to create a new clip list.
6
Press the MENU button.
The CLIP menu appears.
7
Use the M /MARK1 or m /MARK2 button to select
“ADD”, and then press the SET button.
The scene selection window appears.
(Subsequently, this entire screen is called the “scene
selection window”.)
Press the , /OUT button to switch the display.
Display item types