91
Registering Local Information
C
h
a
p
te
r 2:
R
e
gi
s
tr
a
tio
n
an
d Se
tu
p
fo
r Sy
s
tem
A
d
m
in
is
tr
a
to
rs
Off:
Does not display the current audio input
level.
Volume
On:
Displays the volume meter for a certain
duration when the volume is adjusted.
Off:
Does not display the volume meter.
LAN Status
On:
Displays the current status of LAN
connection.
Off:
Does not display the current status of
LAN connection.
ISDN Status
On:
Displays the currently used ISDN unit
port.
Off:
Does not display the currently used
ISDN unit port.
ISDN is supported in version 1.41 and later.
The Administrator setup menu is used for
the system administrators.
Password
By registering the password in this menu,
you can restrict user access from the system
or the Web page to the setup menus and
Phone Books, and prevent their
modification.
If a password is not enabled, anyone will be
able to access the system using the respective
user name. Be sure to configure all of the
passwords to prevent unauthorized third parties
on the network from accessing the system.
For details on when each password is used
for authorization in the Web page, see
“Chapter 7: Web Control Function”.
Administrator Password
Use up to 8 alphanumeric characters and
symbols to register the password used by the
system administrator.
When you register an Administrator
Password, a password prompt will appear
when you access the Administrator setup
menu. In addition, the Administrator
Password can be used as the main password
if multiple passwords are registered. For
example, if the Phone Book Modification
Password, Save Settings Password, and
Administrator Password are registered, the
Administrator Password can be used to
modify Phone Books and settings.
• After you enter the Administrator Password
to modify settings or Phone Books, unless
you switch to a different screen from the
setup menu or Phone Book screen,
modification will be enabled without
password reentry. In addition, modification
will be enabled without password reentry for
about 2 minutes after returning to the Home
menu from the setup menu or Phone Book.
The same applies when you access the
Administrator setup menu.
• Registering only the Administrator Password
will not enable password protection for
settings and Phone Book modification.
Always register the Phone Book
Modification Password and the Save Settings
Password in addition to the Administrator
Password.
• Be aware that registering other passwords
but leaving the Administrator Password
blank allows for modification and
connection from the Web page without
password input.
• Make sure to write down the Administrator
Password. If you should forget the
Administrator Password, consult your Sony
dealer. In this case, the memory of the
Communication System is initialized before
repair, and the data in the Phone Book and
History lists, as well as various setting data,
are erased.
Phone Book Modification Password
Use up to 8 alphanumeric characters and
symbols to register the password used for
Phone Book modifications.
Note
Administrator Setup Menu
Note
Administrator1
Notes
