38
System Connections
• The REC OUT jack is used to make an audio recording of a communication. This is not
used during regular communication.
To attach the Camera Unit to a tripod
Attach the tripod to the tripod attachment screw hole at the bottom of the
camera unit.
Use a screwdriver to tighten the tripod attachment screw according to the
camera unit’s specifications while using the following as a guide for the
amount of protrusion (
4
) from the attachment surface.
Attaching the Camera Unit to a Tripod
Amount of protrusion (
4
)
Camera unit
4
= 4.5 to 7 mm
4
= 0.18 to 0.27 in.
SRG-120DH
(camera unit supplied with the PCS-XG100/XG77)
4
= 4.3 to 5 mm
4
= 0.17 to 0.20 in.
PCSA-CXG100/EVI-H100V
(recommended camera unit; not supplied)
4
= 5.5 mm
4
= 0.22 in.
EVI-HD7V/EVI-HD3V
(recommended camera unit; not supplied)
