20
Features
Up to 100 preset camera settings
Up to 100 settings for camera angle and
zoom can be registered in the preset memory
of the System. You can easily switch the
shooting area only by recalling the preset
position.
RF (Radio Frequency) Remote
Commander adopted
The supplied Remote Commander controls
the Communication System using the radio
frequency of 2.4 GHz. The Remote
Commander can be programmed for pairing
with the System on a one-to-one basis to
prevent interference from other systems.
On-screen keyboard
The on-screen keyboard displayed on the
monitor screen allows you to input a
number, address, etc. without moving your
eyes away from the screen.
QoS (Quality of Service) function
for optimization of bandwidth and
traffic packet through network
The Communication System includes the
“Packet Resend Request”, “Adaptive Rate
Control”, and “Forward Error Correction”
functions. Depending on the network status,
these functions are used in Hybrid to
guarantee consistent, high-quality
communications.
Equipped with an HDMI connector
The HDMI connector allows you to connect
an HDMI display unit to the Communication
System easily. Up to two displays can be
connected to the PCS-XG100/XG100S.
In addition, only the PCS-XG100/XG100S
allows video inputs from external devices
via the HDMI connectors.
Supports USB storage
The Communication System is equipped
with USB ports, allowing you to create a
Private Phone Book and store the
customized settings on a USB storage
device.
For details on supported USB storage devices,
consult your Sony dealer.
HD recording
Video and audio can be recorded to a USB
storage device and can be viewed on a
computer later.
HD streaming
You can broadcast streaming video and
audio. This allows people who cannot attend
the communication to watch the proceedings
over the Web using a computer. You can
also select whether to broadcast both video
and audio or audio only.
Supports SIP connection
The Communication System allows
connection to a remote party with an IP phone,
etc. using SIP (Session Initiation Protocol).
The maximum communication bit rate during
SIP connection is 4 Mbps.
Supports SIP (UC) connection
Connection to Microsoft Lync Server will be
possible.
• SIP (UC) will be supported in future version
updates.
• Connecting to Microsoft Lync Server and
conducting multipoint conferences is not
possible.
• Connections to Microsoft Lync Server will
always be encrypted. Encryption is not
required when connecting to another
terminal via IP connection during multipoint
connections. Regardless, we recommend
configuring the encryption setting and using
encrypted connections.
Note
Note
Notes
