Sony ODS-D280F, Руководство по обслуживанию

Страница: 56 / 308

Main
Code Sub
Code Error
Logger Alarm
Status Alarm
Indica-
tor
Blinking
Cycle Description
200 – ○ 1 sec. A TDMA area error was detected during write-back to the re-
cording disc or formatting.
201 – ○ 1 sec. A disc error was detected during finalizing of the recording disc.
300 ○ ○ 1 sec. The physical format of the recording disc is restoring.
2-1-5. Error 6X, Error 8X
When an error is detected relating to a startup operation or relating to an adjustment before writing, one of the following
error codes is displayed.
Main
Code Sub
Code Error
Logger Alarm
Status Alarm
Indica-
tor
Blinking
Cycle Description
60 E65 ○ ○ 0.25 sec. An abnormal value was detected in the measurement of eccen-
tricity in the optical block assembly Ch-0A. (On side 0)
EE5 ○ ○ 0.25 sec. An abnormal value was detected in the measurement of eccen-
tricity in the optical block assembly Ch-0B. (On side 0)
F65 ○ ○ 0.25 sec. An abnormal value was detected in the measurement of eccen-
tricity in the optical block assembly Ch-1A. (On side 0)
FE5 ○ ○ 0.25 sec. An abnormal value was detected in the measurement of eccen-
tricity in the optical block assembly Ch-1B. (On side 0)
61 000 ○ ○ 1 sec. Depletion of OPC area in the disc was detected.
6C 000 ○ ○ 0.25 sec. Other error was detected during startup.
6D 000 ○ ○ 1 sec. The time is coming to replace the cartridge.
001 ○ ○ 1 sec. This media can not be used. For more details, contact your local
Sony Sales Office/Service Center.
6F E00 ○ ○ 1 sec. Startup adjustment or OPC cannot be finished in optical block
assembly Ch-0A. (On side 0)
E03 ○ ○ 0.25 sec. Adjustment failed in starting optical block assembly Ch-0A. (On
side 0)
E80 ○ ○ 1 sec. Startup adjustment or OPC cannot be finished in optical block
assembly Ch-0B. (On side 0)
E83 ○ ○ 0.25 sec. Adjustment failed in starting optical block assembly Ch-0B. (On
side 0)
F00 ○ ○ 1 sec. Startup adjustment or OPC cannot be finished in optical block
assembly Ch-1A. (On side 0)
F03 ○ ○ 0.25 sec. Adjustment failed in starting optical block assembly Ch-1A. (On
side 0)
F80 ○ ○ 1 sec. Startup adjustment or OPC cannot be finished in optical block
assembly Ch-1B. (On side 0)
F83 ○ ○ 0.25 sec. Adjustment failed in starting optical block assembly Ch-1B. (On
side 0)
80 E65 ○ ○ 0.25 sec. An abnormal value was detected in the measurement of eccen-
tricity in the optical block assembly Ch-2A. (On side 1)
EE5 ○ ○ 0.25 sec. An abnormal value was detected in the measurement of eccen-
tricity in the optical block assembly Ch-2B. (On side 1)
F65 ○ ○ 0.25 sec. An abnormal value was detected in the measurement of eccen-
tricity in the optical block assembly Ch-3A. (On side 1)
Continued
ODS-D280U/ODS-D280F
2-8