Menus
32
[Others] Page
2. Control Port Configuration
DHCP
Selects whether to use DHCP to configure the CONTROL connector’s IP
address. This is disabled under default settings.
N
IP Address
When the DHCP is disabled, this specifies the IP address. The default setting is
192.168.0.3.
N
Subnet Mask
When the DHCP is disabled, this specifies the subnet mask. The default setting
is 255.255.255.0.
N
Default Gateway
When the DHCP is disabled, this specifies the default gateway. The default
setting is 192.168.0.253.
N
3. Network Test
Test mode
Select this checkbox to test the network environment. Select the [Test mode]
checkbox for the partner unit as well. This is disabled under default settings.
N
Run
Starts the network environment test.
N
Test result
Displays the test results.
N
Physical link
Test result for the physical interface.
N
MAC address resolution
Test result for the MAIN connector’s MAC address on the partner unit.
N
ICMP Echo/Reply
Test result for the MAIN connector’s IP address and ICMP echo on the partner
unit.
N
Network Genlock
Network synchronization status. This appears only on the Follower side.
N
Packet delay
Average delay time for received packets. This appears only on the Follower side.
N
Packet delay jitter
Difference between the shortest delay and longest delay for received packets.
This appears only on the Follower side.
N
Packet loss
Number of received video packet errors and number of packets lost during the
test, and the total number since the unit was turned on.
N
Throughput (informative)
Bit rate of the video packets received during the test (reference value), and the
total byte count of the received packets.
N
Apply
Click this after modifying the settings to apply them.
Item
Description
Target
Apply
Click this after modifying the settings to apply them.
1. Device Name
Specifies the name of this unit. This name is displayed in the title of the web
menu. The default setting is [Sony IP Live Production Unit].
Y
2. User Name and Password
Change
Select Items
Selects the item to be changed.
User Name
Select this checkbox to change the user name. The default setting is [Users].
N
Password
Select this checkbox to change the password. The default setting is [NXL-IP55].
N
User Name
Displays the current user name.
N
New User Name
Enter the new user name.
N
Password
Enter the current password.
N
New Password
Enter the new password.
N
Retype New Password
Reenter the new password.
N
3. Setting Restore
Create a System Restore point
Saves the current settings as the restore point.
Select this checkbox, and click the [Create] button.
N
Undo System Changes with
System Restore
Returns the unit’s settings to the restore point conditions.
Select this checkbox, and click the [Restore] button.
N
Undo System Changes with
Default Settings
Returns the unit’s settings to the default settings.
Select this checkbox, and click the [Default] button.
N
Item
Description
Target
