Menus
25
[I/O] Page
3. Color Bars
Color Bars ON
SDI in 1
Switches the signal corresponding to the HD SDI IN connector 1 input to color
bars with tone signal. This is disabled under default settings.
Y
SDI in 2
Switches the signal corresponding to the HD SDI IN connector 2 input to color
bars with tone signal. This is disabled under default settings.
Y
SDI in 3
Switches the signal corresponding to the HD SDI IN connector 3 input to color
bars with tone signal. This is disabled under default settings.
Y
SDI out 1
Switches the output from HD SDI OUT connector 1 to color bars. This is
disabled under default settings.
Y
SDI out 2
Switches the output from HD SDI OUT connector 2 to color bars. This is
disabled under default settings.
Y
SDI out 3
Switches the output from HD SDI OUT connector 3 to color bars. This is
disabled under default settings.
Y
SDI out 4
Switches the output from HD SDI OUT connector 4 to color bars. This is
disabled under default settings.
Y
Monitor out
Switches the output from HD SDI OUT connector M to color bars. This is
disabled under default settings.
Y
Color Bars Select
Full / SMPTE
Selects the color bars type.
Full / SMPTE
Y
Moving
Specifies whether the color bars move. This is disabled under default settings.
Y
Tone Level
Sets the audio level of the tone signal added to the color bars.
0 / –16 / –18 / –20 / –22 / –24 / –
∞
(dBFS)
Y
4. Operation Manual
Language Select
Selects the language of the operation manual.
N
View Operation Manual (PDF)
Click this to display the operation manual in the selected language.
N
5. License Information
View License Information
Displays detailed license information and a list of software packages.
N
Apply
Click this after modifying the settings to apply them.
Item
Description
Target
Apply
Click this after modifying the settings to apply them.
1. SDI out
SDI out 1
Selects the signal to be output from each HD SDI OUT connector. The initial
value for selectable signals differs depending on the [Transmission Settings] on
the [Structure] page.
SDI in 1:
Outputs the signal that corresponds to the input of HD SDI IN
connector 1.
SDI in 2:
Outputs the signal that corresponds to the input of HD SDI IN
connector 2.
SDI in 3:
Outputs the signal that corresponds to the input of HD SDI IN
connector 3.
Opposite SDI in 1:
Outputs the signal that corresponds to the input of the
partner unit’s HD SDI IN connector 1.
Opposite SDI in 2:
Outputs the signal that corresponds to the input of the
partner unit’s HD SDI IN connector 2.
Opposite SDI in 3:
Outputs the signal that corresponds to the input of the
partner unit’s HD SDI IN connector 3.
–:
Outputs a black screen.
Y
SDI out 2
Y
SDI out 3
Y
SDI out 4
Y
Item
Description
Target
