Sony nxcam HXR-NX3D1E, Руководство по эксплуатации, Страница: 46 / 124

GB
Notes
When the INPUT1/INPUT2 (LINE/MIC/
MIC+48V) switch  or  is set to LINE, the
input level is fixed to +4dBu. Even if you reset
the ATT switch, the input level does not change.
 Set the channel to be recorded.
You can select the channel to be
recorded with REC CH SELECT
(INPUT1) switch

.
The position
of the REC
CH SELECT
(INPUT1)
switch Audio recorded on CH1,
CH2
CH1·CH2 INPUT1 CH1
CH2
CH1 INPUT1 CH1
INPUT2 CH2
Tips
To use a stereo microphone with 2 XLR (3PIN)
plugs, connect Lch to the INPUT1 jack  and
Rch to the INPUT2 jack  , and set the REC
CH SELECT (INPUT1) switch  to CH1.




Making good use of
your camcorder
The and icons indicate the 3D and
2D positions of the 2D/3D switch (p. 24),
respectively.
Deleting images
You can free media space by deleting
movies and photos from recording media.
Notes
You cannot restore images once they are
deleted. Save important movies and photos in
advance.
Do not remove the battery pack or the AC
Adaptor from your camcorder while deleting
the images. It may damage the recording media.
Do not eject the memory card while deleting
images from the memory card.
You cannot delete protected movies and photos.
Undo the protection of the movies and photos
to delete them, before you try to delete them
(p. 48).
Tips
If you start playing back an image by selecting it
from the Event Index screen, you can delete the
image using on the playback screen.
To delete all images recorded in the recording
media, and recover all the recordable space of
the media, format the media (p. 80).
Reduced-size images which enable you to view
many images at the same time on an index
screen are called “thumbnails.”

Press (View Images) (p. 28).
 Touch (MENU)

[Edit/
Copy]

[Delete].








