GB
Self-diagnosis
display/Warning
indicators
When an error occurs, a warning indicator
appears on the LCD screen.
You can fix some problems associated with
the symptoms yourself. If the problem
persists even after you have tried a couple
of times, contact your Sony dealer or local
authorized Sony service facility. In this case,
when you contact them, give them all the
numbers of the error code beginning with
C or E.
You may hear a melody when some warning
indicators appear on the screen.
C:(or E:)
:
(Self-diagnosis display)
C:04:
The battery pack is not an “InfoLITHIUM”
battery pack (V series). Use an
“InfoLITHIUM” battery pack (V series)
(p. 105).
Connect the DC plug of the AC Adaptor to the
DC IN jack of your camcorder securely (p. 15).
C:06:
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:13:
/ C:32:
Remove the power source. Reconnect it and
operate your camcorder again.
E:
:
Follow the steps from
on page 87.
(Battery level warning)
The battery pack is nearly used up.
Depending on the operating environment or
battery conditions,
may flash, even if there
Movies cannot be viewed or copied to a
computer.
Disconnect the Built-in USB Cable from the
computer, and turn on your camcorder, then
connect the cable again.
You need to install the supplied “Content
Management Utility” to copy movies from
your camcorder to your computer (p. 56).
The computer freezes.
Disconnect the Built-in USB Cable from the
computer, and restart the computer, then
connect the computer and your camcorder
again in the correct order.
