Sony NSR-500, Руководство пользователя

Страница: 81 / 133

81
Configuring Alarm Output Settings
C
h
ap
te
r 4
A
pplic
at
io
n
S
e
tti
n
gs
To use alarm outputs, the alarm output pin settings on
the device must also be enabled.
Name
Enter the names of the alarm outputs. They can be up
to 32 characters long.
Pulse
Select the check box when you want to specify and
enter a pulse interval. If you select this, enter the pulse
interval in [Pulse Duration].
Pulse Duration
Enter the duration to sustain pulse output once it is
turned on within the range of 0 to 60,000 milliseconds.
Invert
Select the check box to invert the polarity of the output
pins.
Enabling invert does not change the state of the current
output pins. If you turn the output pins on/off when
they are in an inverted state, the actual output signal
state is inverted to off/on.
Also, in the case of output pins of the NSR unit, state
initialization is performed according to the invert
setting at startup.
(When inverted: On at startup, When not inverted: Off
at startup)
[Alarm Out] Tab (Camera)
You can configure the alarm output pins of the camera
selected in the tree.
After configuring each item, click [Apply] to save your
settings.
Alarm Output Pin List
This displays a list of the alarm output pins configured for
the camera selected in the tree.
Enable
Select the check boxes to enable the pins for the alarm
outputs.
No
This displays the numbers of the alarm output pins.
This item cannot be changed.
Name
Enter the names of the alarm outputs. They can be up
to 32 characters long.
Pulse
Select the check box when you want to specify and
enter a pulse interval. If you select this, enter the pulse
interval in [Pulse Duration].
Pulse Duration
Enter the duration to sustain pulse output once it is
turned on within the range of 0 to 60,000 milliseconds.
Invert
Select the check box to invert the polarity of the output
pins.
Enabling invert does not change the state of the output
pins. If you turn the output pins on/off when they are
in an inverted state, the actual output signal state is
inverted to off/on.
Preview
This displays the images captured from the camera.
Caution