NAS-Z200DiR/Z200iR.GB.4-151-738-
12
(1)
2
GB
G
etting star
ted
Setting the clock
The time must be correctly set on the clock for
the correct operation of some features. Do the
procedure below to set the clock.
Note
The unit is factory set to start playing demonstration
automatically if no operation is performed for about 60
seconds. To disable the automatic demonstration, set the
clock.
1
Select [Settings] from the Home
menu.
Settings menu appears.
2
Select [Common Setting] – [Clock
Setting].
When the clock has not been set, “0:00”
appears. When the clock has been set, current
time appears. A 24-hour clock is used for the
time display.
3
Select [Change] .
4
Press
/
to set the hour and press
ENTER.
5
Press
/
to set the minute and
press ENTER.
6
Select [OK].
To cancel the procedure
Select [Cancel] in step 6, or press HOME.
To go back to the previous display
Press BACK.
