Sony MZ-NHF800, Руководство по эксплуатации

Страница: 67 / 132

67
Dividing a track (Divide)
You can divide a track with a track mark,
creating a new track from the part
following the track mark. The track
numbers will increase as follows.
This operation can be done on the
recorder only.
•
You cannot add a track mark on a track that
has been transferred from your computer.
•
You cannot divide a track that has been
recorded in Hi-MD mode using the MD
Simple Burner software.
•
The Bookmark setting will be erased if you
carry out the Divide function.
•
You cannot divide a track at its beginning or
end.
•
You cannot divide a track if after the division
causes the total number of tracks on the disc to
exceed the maximum allowed (2,047 tracks
for a disc used in Hi-MD mode or 254 tracks
for a standard disc).
While playing or pausing, press T MARK
on the recorder at the point you want to
mark.
“MARK ON” appears in the display, and
a track mark is added. The track number
will increase by one.
To add track marks while
recording (except while
synchro-recording)
Press T MARK on the recorder (press
P-MODE/
on the remote control) at
the point you want to add a track mark.
You can use Time Mark to add track
marks automatically at specified intervals
(except while digital recording) (page 39).
Notes
1 3 4 2
2 3 1 4 5
Track marking
Track numbers increase.
T MARK
Dividing a track directly