Sony MZ-NHF800, Руководство по эксплуатации

Страница: 41 / 132

41
It will not be possible to make a group setting if
the tracks, groups and disc name on a disc
exceed the maximum number that can be input
(in MD mode only).
The recorder is factory set to create a new
group automatically when recording. This
is convenient when recording several CDs
in succession. You can check the group
recording setting as follows.
While the recorder is stopped, enter the
menu and select “REC Set” - “
:REC” -
“ : REC On”.
To record without creating a
new group
Select “ :REC Off”
at the end of the
procedure above.
You can add a track to an existing group.
Adding a new track at the end
of the selected group
1
While the recorder is stopped and the
group to which you want to add a
track is selected, press
N ENT while
pressing T MARK/REC and GROUP.
2
Play the sound source.
A new track will be added at the end
of the current contents within the
group.
Adding a track at a desired
position within the selected
group
1
While the recorder is play-paused at
the point within the group where you
want to add a new track, press
N
ENT while pressing T MARK/
REC and GROUP.
2
Press X to start recording and play
the sound source.
Note
To create a new group
automatically when
recording
GROUP
X
NAVI/
MENU
5-way control key
(
N ENT)
Jog dial
T MARK/REC
Recording tracks to an
existing group