![Sony MZ-N920 Скачать руководство пользователя страница 72](http://html.mh-extra.com/html/sony/mz-n920/mz-n920_operating-instructions-manual_411006072.webp)
72
Others
Symptom
Cause/Remedy
The recorder does
not work or works
poorly.
• The rechargeable battery is not charged.
,
Charge the rechargeable battery.
• The volume is low.
,
Turn up the volume.
• No disc is inserted.
,
Insert a recorded disc.
• The HOLD function is turned on (“HOLD” appears in the display
when you press an operation button on the recorder).
,
On the recorder, disable HOLD by sliding the HOLD switch to
the opposite direction of the arrow.
• The lid is not firmly closed.
,
Close the lid until it clicks. Then slide OPEN to open the lid.
• Moisture has condensed inside the recorder.
,
Take the MD out and leave the recorder in a warm place for
several hours until the moisture evaporates.
• The rechargeable battery or dry battery is weak (“LOW BATT”
flashes or nothing appears).
,
Charge the rechargeable battery or replace the dry battery with
a new one, or connect the supplied AC power adaptor to the
recorder.
• The dry battery have been inserted incorrectly.
,
Insert the battery correctly.
• While operating, the recorder received a mechanical shock, too
much static, abnormal power voltage caused by lightning, etc.
,
Restart the operation as follows.
1
Disconnect all the power sources.
2
Leave the recorder for about 30 seconds.
3
Connect the power source.
• The disc is damaged or does not contain proper recording or
editing data.
,
Reinsert the disc. Rerecord the disc. If the error message still
appears, replace it with another disc.
• There is an internal malfunction in the system.
,
Remove the dedicated USB cable from the recorder, restart
your computer, and then connect the cable to the recorder
again.