34
-GB
model name1[MZ-B100] model name2[MZ------]
[3-235-455-
11
(1)]
masterpage:Left
filename[C:\SON_SSIAJX_102\MZ-B100\3235455121GBESRU\02GB-
MZB100UCE\040OPE.fm]
z
When you erase a track mark, the date, time,
and name assigned to the mark are also erased.
Notes
•
When you erase a track mark between the two
consecutive tracks that are registered to
different groups, the second track is re-
registered into the group containing the first
track. In addition, if you combine a track that
is registered to a group with a track that is not
(consecutive tracks), the second track takes
the same registration setting as the first track.
For example, if the first track is registered to a
group, the second track will be registered to
the same group as the first track.
•
You cannot erase track marks according to the
system limitations. For details, see “System
limitations” (page 49).
Labeling recordings
You can name tracks during playback,
discs during stop, and both during
recording. Each name can be as long as
200 letters.
Each disc can hold up to 1700
alphanumeric letters during playback or
stop.
You can enter about 500 alphanumeric
characters and symbols during the
recording of each track.
Available characters
•
Capital and small letters of the English
alphabet
•
Numbers 0 to 9
•
!
" # $ % & ( ) * . ; < = > ?
@ _ ` + – ' , / : _ (space)
Notes
•
“NAME FULL” appears when you try to enter
more than 1,700 characters on a disc. Enter a
shorter name for the track, group, or disc, or
delete “LP:” from the track name recorded in
MDLP mode.
•
When labeling a disc which has been recorded
using the group function, be sure to turn the
group function on to avoid misoverwrite the
group information.
•
If you enter the symbol “//” between the
characters in disc names such as “abc//def”,
you may be unable to use the group function.
Labeling a disc during stop
To label a disc that contains group
settings, you must turn the group mode on
before doing the labeling procedure
(page 23).
1
Insert a disc.
When a disc is already inserted, make
sure the recorder is stopped.
2
Press EDIT/ENTER.
“
: Name” flashes in the display.
3
Press EDIT/ENTER again.
The disc is ready to be labeled.
4
Press
.
or
>
repeatedly to
select a letter and press
N
to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
Press/Turn
Functions
X
To switch between
capital letters, small
letters, and marks /
numbers.
.
/
>
EASY
SEARCH
+/–
TRACK MARK
X
N
x
STOP
PLAY MODE
DISPLAY
EDIT/
ENTER
