Sony MVS-8000X SystemMVS-7000X System, Руководство пользователя

Страница: 596 / 706

USO
RESTRITO
596
Setting Button Assignments (Prefs/Utility Menu)
Ch
a
p
te
r 19
Co
n
tr
o
l P
a
n
e
l S
e
tu
p
(P
a
n
e
l)
Command name
a)
Function Button status
Lit green Lit orange
Inhibit Set Inhibit cross-point button Can be set only while
pressed (lit) When the function is
assigned
Inhibit All Clear Clear all cross-point button inhibit settings Can be set only while
pressed (lit) When the function is
assigned
K-SS Store Enable/disable key snapshot saving
b)
Enabled Disabled
1st DSK Fader Inhibit Inhibit operation of the first downstream key
control block On Off
2nd DSK Fader Inhibit Inhibit operation of the second downstream
key control block On Off
3rd DSK Fader Inhibit Inhibit operation of the third downstream key
control block On Off
4th DSK Fader Inhibit
Inhibit operation of the fourth downstream key
control block
On Off
SWR1 LAN Status SWR1 communications status
c)
Communications
disconnected During
communication
SWR2 LAN Status
SWR2 communications status
c)
Communications
disconnected During
communication
a) For the safe title on/off commands (from ME1 PGM1 ST-ME1 PGM4 ST
to AUX1 ST-AUX48 ST), the name of the assigned output signal is
shown.
b) Pressing this button to turn it on enables key snapshot operations for all
control blocks.
c) Control LAN status only.
Assigning a menu shortcut to a memory
recall button
1
Referring to the procedure up to step 3 in
“Assigning
a Function to a Memory Recall Button in the Utility/
Shotbox Control Block” (page 593)
, select [Menu
Shortcut].
The memory recall buttons in the utility/shotbox
control block flash orange.
2
Using any of the following methods, display the menu
to which you want to make a shortcut.
•
In the menu control block, press the relevant top
menu selection button, then select VF and HF.
•
Press the menu page number button in the upper left
corner of the menu screen, then enter a menu number
from the numeric keypad window.
•
Press a particular control panel button twice in rapid
succession.
3
In the utility/shotbox control block, select the bank,
and press the button to which you want to assign the
shortcut.
The menu screen goes back to the Panel >Prefs/Utility
>Utility Module Assign menu, and the selection is
reflected in the status area.
The buttons in the utility/shotbox control block flash.
4
Repeat steps
2
and
3
as required, to assign all desired
menu shortcuts to the buttons in the utility/shotbox
control block.
To abandon the process of menu shortcut
assignment
In the Utility Module Assign menu, press [Menu Shortcut].
This exits the menu shortcut assignment mode.
Setting names to be displayed in memory
recall buttons
Notes
The name you set using the following procedure is
displayed only when “Menu Shortcut” or “Utility
Command” has been assigned to the selected memory
recall button. To set a name for display in a memory recall
button to which “Shotbox Recall” or “Macro Recall” has
been assigned, use the Shotbox menu or Macro menu.
1
In the Panel >Prefs/Utility >Utility Module Assign
menu, select the button using any of the following
methods.
•
Press directly on the list.
•
Press the arrow keys to scroll the reverse video
cursor.
•
Turn the knobs.
Knob Parameter Adjustment Setting values
1 Bank Bank selection 1 to 4
2 Button No Control block
button selection
1 to 24
2
Press [Name].