Sony MVS-8000X SystemMVS-7000X System, Руководство пользователя

Страница: 534 / 706

USO
RESTRITO
534
Operations on Individual Files
Knob Parameter Adjustment Setting values
1 List L Select the first
register whose
data is to be
saved 1 to 99
2 List R Select the first file
to which data is to
be saved 1 to 99
3 Num Number of
registers to be
selected 1 to 99
Knob Parameter Adjustment Setting values
1 List L Select the first
register into
which the data is
to be loaded 1 to 99
2 List R Select the first file
in which data is
held 1 to 99
3 Num
Number to be
selected
1 to 99
Ch
a
p
te
r 17
Fi
le
s
Notes
For key snapshots, snapshots, and effects, you cannot
perform the following operation when [Src Patch Link] is
lit on the menu screen
(see page 662) .
1
In the File menu, select VF3 ‘Snapshot’ and HF1
‘Snapshot.’
2
In the device selection area on the left, select
[Register].
3
In the device selection area on the right, select [HDD]
or [Memory Card], then select a directory.
See “Selecting a Device for Operations” (page 533).
4
Using either of the following methods, select the data
to be saved, and the file in which to save it.
•
To select all files within the list, press [ALL] below
the list.
•
To select multiple files, turn the knobs to select in
the following ranges.
•
To select a single file, press the arrow keys to scroll
the reverse video cursor, or press directly on the list
in the status area.
5
Press [
t
Save].
This saves the selected register data in the specified
location.
If there is already data in the specified location, a
confirmation message appears.
•
Select “Yes” to overwrite the data.
•
Select “No” to cancel saving all of the data.
Saving frame memory files
therefore for correct operation the two files must always be
handled together.
Between steps
3
and
4
of the procedure above, “Saving
Files,” do as follows.
1
To select the frame memory folder, press [Default] in
the device selection in the list on the left.
A pull-down menu appears.
2
Press the required folder name.
3
Carry out the same operations as in steps
1
and
2
on
the list on the right.
4
Select the type of data to be displayed.
•
To display still image files, press [Still].
•
To display clip files, press [Clip].
•
To display extended clip files, press [Ext Clip].
•
To display all types of file, press [All].
Loading Files
As an example, to load a snapshot file from hard disk or
memory card to a register, use the following procedure.
1
In the File menu, select VF3 ‘Snapshot’ and HF1
‘Snapshot.’
2
In the device selection area on the left, select
[Register].
3
In the device selection area on the right, select where
the file is held ([HDD] or [Memory Card]), and then
specify a directory.
See “Selecting a Device for Operations” (page 533).
4
Using any of the following methods, select the register
to which you want to load, and the file to be loaded.
•
To select all files within the list, press [ALL] below
the list.
•
To select multiple files, turn the knobs to select in
the following ranges.
Notes
When the signal format is 1080P, saving a still image file
creates two still image files for each frame. An ‘A’ is
automatically appended to the first file name, and a ‘B’ is
appended to the second file name. If either of these files is
missing, it is not possible to recreate the image, and