Sony MVS-8000X SystemMVS-7000X System, Руководство пользователя

Страница: 459 / 706

USO
RESTRITO
Time Settings
459
Ch
a
p
te
r 13
K
e
y
fra
m
e
E
ffe
c
ts
For example, to set 9 seconds and 20 frames, enter
920. You can also use the [TRIM] button to enter a
difference value
(see page 449) .
5
Press the [ENTER] button to confirm the entry.
This changes the keyframe duration to the new setting.
Notes
In addition to the above operation, the keyframe
duration may also be automatically changed as a result
of changing the effect duration
(see the next section) .
3
Using the numeric keypad in the numeric keypad
control block, enter the timecode value for the delay,
as a maximum of four digits.
You can also use the [TRIM] button to enter a
difference value
(see page 449) .
4
Press the [ENTER] button to confirm the entry.
Setting the Effect Duration
To set the effect duration, use the following procedure.
1
Press the [EDIT ENBL] button, turning it on.
2
Press the [EFF DUR] button, turning it on.
The display in the numeric keypad control block
shows “DUR” followed by the effect duration
(minutes:seconds:frames).
3
Using the numeric keypad in the numeric keypad
control block, enter the timecode value for the effect
duration, as a maximum of six digits.
For example, to set 3 minutes 7 seconds and 15 frames,
enter 30715. You can also use the [TRIM] button to
enter a difference value
(see page 449) .
4
Press the [ENTER] button.
Notes
In addition to the above operation, the effect duration
may also be changed as a result of inserting or deleting
keyframes.
For details, see “Time Settings” (page 437).
Setting the Delay
To set the delay (see “Delay setting” (page 438)) , use the
following procedure.
1
Press the [EDIT ENBL] button, turning it on.
2
Press the [DELAY] button, turning it on.
The display in the numeric keypad control block
shows “DELAY” followed by the delay time
(seconds:frames).