Sony MVS-8000X SystemMVS-7000X System, Руководство пользователя

Страница: 352 / 706

USO
RESTRITO
352
Global Effect Operations
Knob Parameter Adjustment Setting values
1 Soft Softness of
edges of
crossed section 0.00 to 100.00
Ch
a
p
te
r 11
DM
E
O
p
e
ra
ti
o
n
s
•
To combine channels 2 and 3, press [Ch2+Ch3],
turning it on.
•
To combine the previously combined combinations
of channels 1 and 2, and channels 3 and 4, press
[Ch1+Ch2] and [Ch3+Ch4], turning them on.
Notes
The only two buttons that can be selected
simultaneously are the combination of [Ch1+Ch2] and
[Ch3+Ch4].
The selected channels are combined.
To cancel a combine
When for example [Ch2+Ch3] is on, pressing [Ch2+Ch3]
once more turns it off. Alternatively, pressing a different
combination button to select it cancels the combine
selection for the current combination.
Mixing the images of up to four
consecutive channels
1
In the Combiner Priority menu, press [Mix], turning it
on.
2
Adjust the following parameters.
For case “Ch1+Ch2”
Knob Parameter Adjustment Setting values
1 Mix Mix degree
0.00 to 100.00
a)
a) See “Mixing Ch1 and Ch2” (page 350) .
For case “Ch1+Ch2+Ch3”
Knob Parameter Adjustment Setting values
1 Mix1 Mix degree for
mix of channel 1
with result of
Mix2 0.00 to 100.00
a)
2 Mix2
Mix degree for
channels 2 and
3
0.00 to 100.00
a)
a) See “Mixing Ch1, Ch2, and Ch3” (page 350) .
For case “Ch1+Ch2+Ch3+Ch4”
Knobs 1 and 2 set the same parameters as “For case
‘Ch1+Ch2+Ch3’,” respectively. Knob 3 is
additionally effective, which sets the parameter Mix3
(in the same setting value range as with knobs 1 and 2).
Mixing pairwise the images of channels 1
and 2, and channels 3 and 4
1
In the Combiner Priority menu, press [Combiner1
Mix], turning it on.
2
Adjust the following parameter.
Knob Parameter Adjustment Setting values
1 Mix1 Mix degree for
channels 1 and
2 0.00 to 100.00
a)
a) See “Pairwise mixing of Ch1 and Ch2, and Ch3 and Ch4” (page
351) .
3
Press [Combiner2 Mix], turning it on.
4
Adjust the following parameter.
Knob Parameter Adjustment Setting values
1 Mix2 Mix degree for
channels 3 and
4 0.00 to 100.00
a)
a) See “Pairwise mixing of Ch1 and Ch2, and Ch3 and Ch4” (page
351) .
Automatically setting the priority of
overlapping images
To set the system so that the priority of overlapping images
is automatically determined by their position on the Z-axis,
in the Combiner Priority menu, press [Auto], turning it on.
Notes
It is not possible to cross images. If an image is rotated, the
priority is determined by the position on the Z-axis of the
center of the image.
Crossing images from up to four
consecutive channels in three dimensions
Notes
The three-dimensional crossing function is not supported
on the MVE-8000A.
1
In the Combiner Priority menu, press [Depth], turning
it on.
2
Set the following parameters.
For case “Ch1+Ch2”