Sony MVS-8000X SystemMVS-7000X System, Руководство пользователя

Страница: 309 / 706

USO
RESTRITO
Applying Special Effects (Effects on the Overall Video Signal)
309
Knob Parameter Adjustment Setting values
3 Y Gain Amount of
gain for clip
adjusted
input signal
Y level
–100.00 to +100.00
4 Y Offset Offset added
to clip and
gain
adjusted
input Y
signal 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Mix Ratio Mix amount
for Metal
video and
input video 0.00 to 100.00
2 Y Clip Clip level of
input signal
Y level 0.00 to 100.00
Ch
a
p
te
r 11
DM
E
O
p
e
ra
ti
o
n
s
To set the color of the sections other than the
outlines for Draw
Press [Matte], turning it on, and adjust the following
parameters to set the color of the sections other than
the outlines.
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
To select the signal to mix with the relief pattern for
Relief
In the <Chroma Type> group, select the signal to mix
with the relief pattern.
Matte: Select a single color. The following
parameters can be adjusted.
Knob Parameter Adjustment Setting values
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Video: Select the input video signal.
6
To invert white and black in the extracted video, or to
invert the outlines and the sections other than the
outlines, press [Nega], turning it on.
Masking the Sketch effect with a selected
pattern
Press [Mask] to display the Mask menu and set the type of
pattern and modifiers
(see page 310) .
Metal Settings
Applying the Metal effect
1
In the DME menu, select VF7 ‘Enhanced Video
Modify’ and HF2 ‘Metal.’
The Metal menu appears.
2
Press [Metal], turning it on.
3
Set the parameters.
4
In the <Metal Mode> group, select the type of metallic
gloss.
Gold: Give a gold gloss to the input video.
Silver: Give a silver gloss to the input video.
Rainbow: Give a rainbow color gloss to the input
video.
Variable: Give a metallic gloss to the input video in
any color by adjusting the following parameters.
Knob Parameter Adjustment Setting values
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Masking the Metal effect with a selected
pattern
Press [Mask] to display the Mask menu and set the type of
pattern and modifiers
(see page 310) .
Dim and Fade Settings
Notes
The Dim and Fade functions are not supported on the
MVE-8000A.
Applying the Dim effect
1
In the DME menu, select VF7 ‘Enhanced Video
Modify’ and HF3 ‘Dim & Fade.’
The Dim & Fade menu appears.
2
Press [Dim], turning it on.
3
Set the following parameters.
Knob Parameter Adjustment Setting values
1 Start Point where
dimming
starts (dim
start point)
–100.00 to +100.00