Sony MVS-6000 Скачать руководство пользователя страница 237

Страница: 237 / 400

237

Basic Procedure for DME Wipe Settings

Chap

r 6

DME

Wipes

The DME wipe pattern displayed on the screen moves to the position of
the specified button.

Setting relative positions to move the DME wipe pattern

In two-channel mode, use the following procedure.

In the M/E-1 >DME Wipe menu, select HF5 ‘Modify.’

The Modify menu appears.

In the <Ch Select> group, select the target channels.

Press [Position] in the <Position> group, turning it on.

Set the following parameters.

For details of the method of DME wipe pattern selection, see “DME Wipe
Pattern Selection” (page 232).

Setting the DME wipe pattern size (Size)

In the M/E-1 >DME Wipe menu, select HF5 ‘Modify.’

The Modify menu appears.

Depending on whether the selected pattern is in one-channel mode or two-
channel mode, proceed as follows.

For a pattern in one-channel mode:

press [1st Ch], turning it on.

For a pattern in two-channel mode:

from the <Ch Select> group, select

the corresponding channel. You can select more than one channel at
the same time.

Press [Size], turning it on.

Set the following parameters.

Knob

Parameter

Adjustment

Setting values

Relative H

Relative movement in the
horizontal direction

–400.00 to +400.00

Relative V

Relative movement in the vertical
direction

–400.00 to +400.00

Knob

Parameter

Adjustment

Setting values

Size

Set size of effect

0.00 to 200.00

Содержание MVS-6000

















































































































































































































































































































































































































Результаты поиска

Содержание MVS-6000

Отзывы:

Бренды по названию

Популярные бренды

Sony MVS-6000, Руководство пользователя

Результаты поиска

Содержание MVS-6000

Отзывы:

Бренды по названию

Популярные бренды