Sony MVS-3000 System, Руководство пользователя

Страница: 59 / 315

59
Independent Key Transitions
Chapt
er
3
Sig
nal Se
lec
tion and
T
ra
ns
itions
Basic Independent Key Transition
Operations
Switching keys with key independent
transitions
Transition control block (right side)
To set independent transitions for the keyers on switcher
bank, use the transition control block.
1
Select one or more of the delegation buttons [KEY1]
to [KEY4] ([DSK1] to [DSK4] in the PGM/PST
bank), turning them on.
You can press more than one button at the same time.
2
Select the transition type.
To fade a key in or out: Press the [MIX] button,
turning it on.
To insert or delete a key using a dedicated wipe
pattern: Press the [WIPE] button, turning it on.
To insert or delete a key using a dedicated DME
wipe pattern: Press the [DME] button, turning it
on.
If, in the Setup menus, you set insertion and deletion
as independent modes, make the following transition
settings.
Separate settings are required for both inserting a key
and deleting it. For example, with the key not inserted,
if you select the transition type and carry out a
transition, this will be the setting when inserting a key.
You can also use the Transition menu to select a
desired independent key transition type for each key
(see the next section).
For details about wipe settings, 1 “Wipe Settings for
Independent Key Transitions” (p. 87) .
For details about DME wipe settings, 1 “DME Wipe
Settings for Independent Key Transitions” (p. 97) .
3
Execute the transition.
To insert or delete the key gradually with a mix or
wipe transition: Press one of the [KEY1 TRANS]
to [KEY4 TRANS] buttons.
For details about the transition rate,
1
“Setting the
Independent Key Transition Rate” (p. 60) .
For details about operation together with a common
transition,
1
“Combining other transitions with
independent key transitions” (p. 57) .
To cut the key in or out instantaneously: Press one
of the [KEY1 ON] to [KEY4 ON] buttons for each
keyer.
In an independent key transition, the pattern limit
function is not available.
Copying keys
To copy keys within the same block
Press the [KEY3] button while holding down the [KEY1]
button.
Information for key 1 is copied to key 3.
The transition
completes with the
key deleted.
Example 2: When the common transition [AUTO TRANS]
button is pressed later
Common
transition (wipe)
Independent key
transition (mix)
Independent key transition type selection buttons
Key source name display
Key snapshot buttons
Key delegation buttons
Notes