manualshive.com logo in svg

Sony MVS-3000 System, Руководство пользователя

Поделиться
Скачать
Sony MVS-3000 System Скачать руководство пользователя страница 246

246

Signal Output Settings

  C

hap

te

r 1

8  S
w

itc

he

r S

etu

p

For down-conversion, the image position setting in edge 
crop mode is the same as for up-conversion.
The value is from –30 to +30 inclusive.

For details, 

1

“Setting the image position in edge crop 

up-conversion mode” (p. 244)

.

For down-conversion, the enhancer settings are the same 
as for up-conversion.

For details, 

1

“Making enhancer settings” (p. 245)

.

Copying format converter input data

1

In the Engineering Setup >Switcher >Input >FC 
Adjust menu (7332.2), press [Copy].

The Copy/Swap >Copy >Format Converter menu 
(3121) appears.

2

Select [Input] in the <Data Select> group.

3

Select the data and press [Copy].

Signal Output Settings

• The numbers that can be configured as output signals are 

1 to 16. Note that numbers up to 32 are also displayed, 
but that only numbers 1 to 16 are enabled.

• The Video Clip, V Blank, Through, Safe Title, and 4:3 

Crop cannot be set for the following outputs.
- Output signals from connectors assigned to Out 1 to 12
- Multi Viewer 1 and 2
- FC Output 1 and 2

Assigning Output Signals

1

Open the Engineering Setup >Switcher >Output 
>Output Assign menu (7333.1).

2

In the <Output Assign> group, select either of the 
following.

[Re-Entry Source]:

 It is possible to make duplicate 

assignments.
M/E-1 Output 1 to 4

1)

PGM/PST 1 to 4

1)

Undefined
Color Bkgd 2
Frame Memory 1 to 8

1) M/E output signals selected in the M/E Output Assign menu.

[Aux Bus]:

 It is not possible to make duplicate 

assignments.
Preset
Edit Preview
AUX 1 to 24

[Output/MV/FC/DME]:

 It is possible to make 

duplicate assignments.
Out 1 to 12

1)

Multi Viewer 1 and 2
FC Output 1 and 2

2)

1) Makes duplicate assignments if the signal that is assigned is the same 

signal as one already assigned to one of Output 1 to 12. However, the 
following signals are unavailable if already assigned to Output 1 to 
12.
Out 1 to 12
Multi Viewer 1 and 2
FC Output 1 and 2

2) FC Output 1 and 2 can be assigned as a pair combination to Outputs 

15 and 16.

3

Select the output connector number and signal to be 
assigned.
For output connectors not to be assigned, press 
[Inhibit].

Original image (16:9) Down-converted image (4:3)

Edge Crop

Letter Box 13:9

Letter Box 14:9

Letter Box 16:9

Squeeze

Notes

Содержание MVS-3000 System




























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды