Sony MVS-3000 System, Руководство пользователя

Страница: 100 / 315

100
DME Wipe Pattern Operations in the Flexi Pad
Cha
pte
r 6
DME
Wi
pes
Note, however, that the pattern numbers for DME wipe
patterns have four digits
( 1
p. 264) .
Editing the DME Wipe Pattern
By pressing the [EDIT ENBL] button to switch the
memory recall section to editing mode, you can edit the
selected DME wipe pattern.
To exit from the editing mode, press the [EDIT ENBL]
button again, or press the [EXIT] button.
The operation of the following buttons is the same as when
editing a wipe pattern.
• [EXIT] button
• [PTN LIMT], [LIMT SET] buttons
• [NORM], [NORM/REV], [REV] buttons
• [KNOB 1/2] button
For details about each button operation,
1
“Editing the
Wipe Pattern” (p. 91) .
DME wipe pattern edge setting buttons
BDR (border): Applies a border to the DME wipe pattern.
SOFT BDR (soft border): Softens the applied border.
You can adjust the parameters selected with these buttons
using the adjustment knobs, when the button is lit green.
When border is selected
When soft border is selected
Buttons for positioning the DME wipe
pattern
POS (positioner): Adjusts the position of the DME wipe
pattern.
CNTR (center): Returns the DME wipe pattern position
to the center.
When you press the [POS] button, the alphanumeric
display first shows the name of the parameter, “H” or “V,”
and then the value of the parameter.
When the [POS] button is lit green, you can adjust the
position of the pattern with the adjustment knobs.
Buttons for setting DME wipe pattern
cropping
CROP: Adjusts the DME wipe pattern cropping.
4:3 CROP: Crops a 16:9 image to 4:3.
When the [CROP] button is lit green, you can set the
cropping ratio of the DME wipe pattern with the
adjustment knobs.
Button for specifying effect size
SIZE: Specifies the effect size.
No. Parameter Adjustment
1 W Border width
2 L Luminance
3 S Saturation
4 H Hue
Parameter group [1/2]
No. Parameter Adjustment
1 W Border width
2 I Border inner softness
Parameter group [2/2]
No. Parameter Adjustment
1 L Luminance
2 S Saturation
3 H Hue
No. Parameter Adjustment
1 H Horizontal position
2 V Vertical position
3 H (R) Relative movement in the horizontal
direction
4 V (R) Relative movement in the vertical
direction
Parameter group [1/2]
No. Parameter Adjustment
1 H Crop the left and right of the image
2 V Crop the top and bottom of the image
3 A Crop the left, right, top, and bottom of
the image
Parameter group [2/2]
No. Parameter Adjustment
1 T Crop the top of the image
2 L Crop the left of the image
3 R Crop the right of the image
4 B Crop the bottom of the image