8
MV-700HR
Connection
A/V OUTPUT
A/V INPUT
DC IN 12V
HEADPHONES/
OPTICAL OUT
OUTPUT
To a digital
amplifier,
etc.
This player is supplied in two kinds of connection method. When using at home, connect it to the
AC outlet. When using in a car, connect the player using the supplied cigar lighter adapter.
When using the AC power supply
Optical cable
(not supplied)
*
AC power cord*
(supplied)
To a wall outlet
AC power
adaptor
(supplied)
TV, etc.
To audio/
video input
connectors
When using the
player in the car
To the cigar
lighter socket
Audio/video cable
(not supplied)
* There are two types of AC power cords supplied. Use the appropriate one that fits the outlet in
your region.
Cigar lighter adapter
(supplied)
Attaching the headrest installation
kit to the seat
The player can be installed behind the headrest
by using the supplied headrest installation kit.
Seat types on which you can mount
the installation kit
•A seat with 2 headrest rods of diameter 10
mm to 15 mm.
•A seat with rods spaced between 42 mm and
192 mm.
Note
Depending on the seat type, it may not be possible
to mount this unit.
Before attaching, adjust the rod spacing
A
and
depth positioning
B
depending on your
headrest.
Note that the depth positioning
B
should be
adjusted as closely as possible to the headrest
in order to prevent the monitor from vibrating.
A
B
A
On A/V OUTPUT connectors
You can connect a TV to the A/V OUTPUT
connectors to output the contents being played
back on the player. Connect the yellow plugs
of the audio/video cable to the video
connectors on both the TV and the player, and
connect the white plugs to the white (left
audio) connectors and the red plugs to the red
(right audio) connectors respectively.
On A/V INPUT connectors
You can connect a VTR, etc. to the A/V INPUT
connectors to input the contents being played
back on the device. You can connect the device
in the same way as described on “On A/V
OUTPUT connectors” above.
On HEADPHONES jack
You can connect a set of headphones to the
HEADPHONES jack.
Notes
• When connecting another device to the player,
be sure to connect the player to the power
source after all other connections are completed.
• If an obstacle such as cigar ash is caught inside
the cigar lighter socket, the contact between the
power cord plug and the socket becomes
incomplete and the plug may get extremely hot
during use. To avoid this, check the socket and
clean it if necessary before connecting the power
cord.
*
Polarity of the plug
15 mm
12 mm
Installation kit
Ø10 mm~15 mm
42 mm~192 mm
1
Remove the headrest and attach the
installation kit to the rods.
You can adjust the lateral position of the
monitor by sliding the installation kit from
side to side before tightening the screw.
2
Attach the installation cradle to the
installation kit and tighten the screw on
the bottom using things like a coin.
C
Adjust the angle of your monitor with the
knob
C
.
Note
The backside of the installation cradle should be
pressed against the headrest for the stable
installation.
Removing the player from the
installation cradle
Remove the player while pressing the button
on the installation cradle.
Installation kit
Installation
cradle
Using the rechargeable battery
pack
Attach the rechargeable battery pack as
illustrated below.
Slide up the rechargeable battery pack until
you hear the click sound.
Removing the rechargeable battery
pack from the player
Push the release button on the rechargeable
battery pack and slide it off.
Charging the rechargeable battery
pack
Charge the rechargeable battery pack using AC
power adaptor and AC power cord. You can
charge the rechargeable battery pack while it is
attached to the unit.
AC power adaptor
(supplied)
AC power cord (supplied)
To a wall
outlet
Rechargeable battery
pack MV-100BAT
(not supplied)
Push to release
Push to release
Installation kit
Front
AC power adaptor
(supplied)
AC power cord (supplied)
To a wall
outlet
When attached to the main unit
When to charge the rechargeable
battery
• Charge the rechargeable battery when
“LOW BATTERY” appears in the display.
• It usually takes about 6 hours* to complete
charging the battery. The lamp of the
rechargeable battery indicates the charging
conditions.
While charging:
Lights in orange
Charging completed: Lights in green
Charging error:
Flashes in green
* The charging time may vary depending on the
surrounding temperature.
Battery duration
Approximately 150 minutes** (fully charged)
** When used at room temperature.
When the monitor settings (S-MENU) are set to
default.
CAUTION
•Remove the rechargeable battery from the
main unit if you do not intend to use the
player for an extended period of time.
•Charge the rechargeable battery before use if
it has not been used for an extended period of
time.
•Once charging is completed, remove the AC
power adapter from the rechargeable battery.
Do not recharge the fully charged battery.
(Once charging is completed, it will take
about 60 minutes for the lamp of the battery
to light in green again.)
•Do not charge the rechargeable battery using
the supplied cigar lighter socket. To charge
the rechargeable battery in a car, use the
connection box and battery rechargeable
cable supplied with optional Car Installation
Kit MV-100CAR.
Inserting the back-up battery
Insert CR2032 battery into the battery
compartment of the player. This battery save
the memory data (clock setting and calendar
setting).
x
Cigar lighter
adaptor
Rechargeable
battery
+ side facing up
AEP, UK, Russian, E (NTSC) models
Ver. 1.1
