Chapter 12
Setup Menus
12-16
Chapter 12
Setup Menus
12-4 Items in the Extended Setup Menu
Menu items in the range 300 to 399, relating to editing operations (Continued)
Menu items in the range 400 to 499, relating to preroll
Item number Item name
Settings
401
FUNCTION MODE
AFTER CUEUP
Select the state that the unit goes into after a cuing-up operation.
STOP :
Stop (the “stop mode”)
STILL:
Still playback (in search mode)
Note
When controlling this unit from an editor with the standard constants set, select
“STOP”.
402
TIME REFERENCE FOR
PREROLL
When prerolling a tape with time code discontinuities, select whether or not to use
CTL pulses to count time code from before a discontinuity.
CTL :
Use CTL pulses to count time code.
TC:
Do not use CTL pulses to count time code.
403
AUTOMATIC PREROLL
REFERENCE ENTRY
Select whether or not the edit IN point is automatically set by pressing the
PREROLL button, when the IN point is not set before starting preroll.
DIS :
IN point is not set automatically.
ENA:
IN point is set automatically.
405
CUEUP BY CTL
Select the tape transport mode when cuing. This setting is valid only when the
function menu item CTL/TC is set to CTL.
CAP. :
During cuing up, the tape transport is in the “pinch ON” state (maximum
tape speed 10 times normal).
REEL :
During cuing up, the tape transport is in the “pinch OFF” state. As the
tape approaches the cue up point and the tape speed drops, the tape transport
switches to the “pinch ON” state.
a)
To give priority to editing accuracy, select “CAP.”.
Item number
Item name
Settings
334
EE REFERENCE
CONTROL
Specify how to select the reference video signal in E-E mode.
normal :
Select according to the flowchart in Section 3-2-1 “External Sync Signal
for the Internal Reference Video Signal Generator”
(page 3-5).
input:
In E-E mode select the input video signal. When not in E-E mode, select
according to the flowchart in Section 3-2-1 “External Sync Signal for the
Internal Reference Video Signal Generator”
(page 3-5).
336
EDIT PRESET INHIBIT IN
KEY PANEL CONTROL
Specify which buttons are disabled in the editing mode setting section on the
lower control panel.
off :
Disable all buttons.
TC:
Disable the TC button.
333
DIGITAL AUDIO EDIT
PRESET REPLACE
Select how to apply digital audio edit preset from an external controller.
NODEF :
Apply edit preset for channels 1 to 8 from external controller to tracks 1
to 8, correspondingly.
PARA:
Apply edit preset for channels 1 to 4 from external controller to tracks 1
and 5, tracks 2 and 6, tracks 3 and 7, and tracks 4 and 8, respectively. Ignore
edit preset for channels 5 to 8.
REVRS:
Apply edit preset for channels 1 to 4 and channels 5 to 8 from external
controller to tracks 5 to 8 and tracks 1 to 4, respectively.
STERE:
Apply edit preset for channels 1 to 4 from external controller to tracks 1
and 2, tracks 3 and 4, tracks 5 and 6, and tracks 7 and 8, respectively. Ignore
edit preset for channels 5 to 8.
a) When controlled from an editor (BVE-2000/9100 etc.),
selecting “REEL” allows high-speed cuing up.