Installation
11-GB
Installing the mouse driver software
8
Make sure that a “Memory Stick” is not in this unit.
If you connect the USB port on the personl computer to this unit with
a “Memory Stick”inserted, the “Memory Stick” driver software
installation on page 13 will be carried out after the mouse driver
software installation has been completed.
9
Connect the USB port on the personal computer to this unit.
Connect the connector on this unit to the personal computer without
inserting a “Memory Stick.”
–For Windows 2000–
The mouse driver software installation starts automatically.
Go to “Installing the “Memory Stick” driver software” section on
page 13.
10
The Windows machine will recognize this unit, and “Add New
Hardware Wizard” will start up.
Click “Next.”
Follow the on-screen instructions to proceed with the installation.
The “Add New Hardware Wizard” starts twice because two drivers
are installed. Do not cancel the installation midway, and complete the
installation.
The Windows® 98/98SE CD-ROM may be needed for this installation.
