background image

135

8. Appendix

AXS Clip Recording/Playback Time

The following tables show the recording/playback time when using AXS-A1TS66 (Unit: minutes).

[Note]

The recording and playback times are for a continuous recording as a single clip. The actual times may be shorter, depending on the number of clips recorded. The recording/playback time may vary due to usage conditions and memory 
characteristics.

X-OCN Recording/Playback Time

MPC-3628

Recording Format

Project Frame Rate

8.6K 3:2

8.2K 17:9

7.6K 17:9

5.8K 6:5

5.8K 17:9

5.4K 16:9

X-OCN XT

23.98/24

23

32

32

41

65

65

25

22

31

31

39

62

62

29.97

18

25

25

33

52

52

47.95

20

32

50

31

31

59.94

26

26

X-OCN ST

23.98/24

34

47

47

60

95

95

25

32

45

45

57

91

91

29.97

27

37

37

48

76

76

47.95

23

30

47

50

22

22

45

45

59.94

18

18

38

38

X-OCN LT

23.98/24

58

80

80

102

160

160

25

55

77

77

98

154

154

29.97

46

64

64

81

128

128

47.95

40

51

80

50

38

38

77

77

59.94

32

32

64

64

Содержание MPC-3626


























































































































































Отзывы: