Sony MKS-6550, Руководство пользователя

Страница: 91 / 454

USO
RESTRITO
Key Adjustments (Menus)
91
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
4 Density Density
No. Parameter Adjustment
1 Size Pattern size
2 Soft Edge softness of the pattern
5 Pattern Pattern number
a)
Ch
a
p
te
r 4
K
e
y
s
You can also press [Pattern Select], and in the
corresponding pattern adjustment menu, change the
pattern.
5
To adjust the color, press [Zabton Color] and adjust
the following parameters.
To select the pattern, display the Mask Ptn Select
menu (1113.1) by pressing the [Mask Ptn Select]
button in the Main Mask menu.
After selecting one of the patterns (wipe patterns 1 to
24)
displayed in the Mix Pattern Select menu, you can
adjust the following parameters.
No. Parameter Adjustment
1 Size Pattern size
2 Soft Edge softness of the pattern
5
To invert the black and white of the mask source, press
[Mask Invert], turning it on.
6
When a pattern is selected as the mask source, set the
Mask
The mask function can be used to mask off unneeded parts
of a key or background, or to remove defects.
Using a mask
For example, to make settings for key 1 on the M/E-1
bank, use the following procedure.
1
Open the M/E-1 >Key1 >Main Mask menu (1113).
2
In the <Mask Type> group, select the mask type.
Key Mask: Masks a part of a key.
Bkgd Mask: Masks a part of a background.
3
In the <Mask Source> group, select the mask source.
Box: Signal from the dedicated box generator
Pattern: Signal from the dedicated pattern generator
4
Set the mask source parameters.
When Box is selected
No. Parameter Adjustment
1 Top Position of top side
2 Left Position of the left side
3 Right Position of the right side
4 Bottom Position of the bottom side
5 Soft Box softness
When Pattern is selected
pattern modifiers as required (see step 5 in
“Executing
a color mix for the key edge fill matte” (
1
p. 89) ).
Applying a DME Effect to a Key
Notes
•
DME (including DME wipes) can be used in up to two
places on a single M/E.
•
On the MVS-3000, DME effects cannot be applied to a
key.
Assigning a DME to a key
1
Open the M/E-1 >Key1 >Processed Key/Resizer menu
(1115).
In the Key3 and Key4 menu, select [Processed Key]
instead of [Processed Key/Resizer].
2
In the <DME Select> group, select the DME channel
(DME1 or DME2) to be used.
The lit colors of [DME1] and [DME2] indicate the
DME assignment.
Lit green: Shows the DME assigned to the currently
selected key.
Lit amber: Shows the DME assigned to a key other
than the currently selected key.
Off: DME is not assigned.
To select a DME being used by another keyer
Press [Override], turning it on, then select the DME
channel.
The later selection is valid, and the button lights green.
You can check the DME operating status in the Status
menu
(
1
p. 152) .
a) The patterns are the same as for a wipe (
“Wipe Pattern List”
(
1
p. 381) ).