USO
RESTRITO
Serial Port Settings
371
Ch
a
p
te
r 21
DCU
S
e
tu
p
4
Specify the item to which the response speed setting
applies.
1.
Maximum Open Delay: Maximum time required to
open a file
2.
Maximum Cueup Delay: Maximum time required to
cue up a file
3.
Play After Cueup Delay: Delay time from the cued-
up state to begin playback
4.
Play After Open Next Delay: Delay time from the
Open Next state to begin playback
5
Set the disk recorder response speed.
No.
Parameter
Adjustment
2
Setting
Response speed setting
6
Press [Set].
7
Repeat steps
4
to
6
as required to make the settings for
other items.
Making detailed settings for a disk
recorder (video disk communications
protocol)
1
In the Engineering Setup >DCU >Serial Port Assign
menu (7355), select the setting target (DCU1 or
DCU2) from the <DCU Select> group.
2
Select the serial port connected to the disk recorder for
which you want to make the settings.
4
In the <DDR Type> group, select the type of disk
recorder.
Player:
Functions as a player.
Recorder:
Functions as a recorder.
5
In the <Name Mode> group, select the file name
character count mode.
Fixed 8 Character:
Uses 8-character file names.
Variable Length:
Uses variable-length file names
(file name is limited to 23 characters).
6
In the <TC Sense> group, select the type of timecode
sensing.
Zero based:
Mode in which timecode is detected
taking the first frame of the recalled file as
00:00:00:00
SOM based:
Mode in which timecode saved in the
recalled file is detected
Notes
Notes
When the MKS-2700 is connected, select 2 for the slot
and a value in the range 1 to 6 for the port.
3
Press [Port Setting].
When “DDR VDCP” is selected as the device type, the
DDR VDCP Setting menu (7355.4) appears.
When “Simple VDCP” is selected as the device type,
the Simple VDCP Setting menu (7355.6) appears.
The details of the above operation modes depend on
the connected device. For more information, consult
the documentation for the connected device.
7
When using a disk recorder that does not support the
timecode drop frame bit, in the <Frame Control
Mode> group, select the drop frame mode or non-drop
frame mode.
Drop Frame:
Drop frame mode.
Non Drop Frame:
Non-drop frame mode.
Notes
This setting is only valid when the system field
frequency is 59.94.
8
Specify the item to which the video port number or
response speed setting applies.
1.
Video Port: number of the video port associated
with the serial port to which the setting applies.
