USO
RESTRITO
Applying Special Effects (Nonlinear Effect Settings)
197
No.
Parameter
Adjustment
1
Transition H Degree of transition in horizontal
direction
2
Random H
Degree of randomness in distance
moved by blocks in horizontal
direction
3
Skew H
Degree of skew in horizontal direction
4
Width H
Horizontal width of partition
5
Angle
Angle of partition line
No.
Parameter
Adjustment
1
H
Horizontal border position
2
V
Vertical border position
No.
Parameter
Adjustment
1
Transition V Degree of transition in vertical
direction
2
Random V
Degree of randomness in distance
moved by blocks in vertical direction
3
Skew V
Degree of skew in vertical direction
4
Width V
Vertical width of partition
5
Angle
Angle of partition line
Ch
a
p
te
r 10
DM
E
O
p
e
ra
ti
o
n
s
Split Slide Settings
You can set the degree of transition, the degree of
randomness in the distance moved by each block, the
degree of sliding, block width, block angle, and other
parameters.
Applying the Split Slide effect
In the Non Linear >Split Slide menu (4141.12), set the
following parameters.
Parameter group [1/2]
Applying the Mirror effect
In the Non Linear >Mirror menu (4141.13), press [Left to
Right], [Right to Left], [Top to Bottom], or [Bottom to
Top] to set the reflection method (multiple selections
possible).
Left to Right:
Reflect left side on right.
Right to Left:
Reflect right side on left.
Top to Bottom:
Reflect top side on bottom.
Bottom to Top:
Reflect bottom side on top.
Left to Right
Top to Bottom
To set the position of the border between the
original and reflection
1
Press [Position].
2
Set the following parameters.
Parameter group [2/2]
To set the partition position
1
Press [Position], turning it on.
2
Set the following parameters.
No.
Parameter
Adjustment
1
H
Horizontal partition position
2
V
Vertical partition position
Mirror Settings
You can choose to reflect in the left to right, right to left,
bottom to top, top to bottom, or any combination of these
directions. You can also set the position of the border
between original and reflections.
Multi Mirror Settings
You can set the width of the original, the center position of
the original, the offset of the image with fixed mirrors, the
direction of the mirrors, and other parameters.
Applying the Multi Mirror effect
In the Non Linear >Multi Mirror menu (4141.14), set the
following parameters.
No.
Parameter
Adjustment
1
Interval H
Horizontal distance between mirrors
(original width)
2
Offset H
Amount of horizontal offset of image
with mirrors fixed
3
Interval V
Vertical distance between mirrors
(original width)
4
Offset V
Amount of vertical offset of image
with mirrors fixed
5
Angle
Mirror angle
To set the center position of the original image
1
Press [Position], turning it on.
2
Set the following parameters.
