13
3 Turning the camera on/setting the clock
1
Open the LCD panel to turn the power on.
Open the LCD panel up to a 90 degrees angle from the camera (
1
), then rotate it to the desired angle
(
2
).
You can also turn the power on by pressing ON/OFF button.
• If you rotate the LCD panel 180 degrees, you can close the LCD panel with the LCD screen facing
out. This is convenient during playback operations.
2
Set the clock with the control button.
1
Select the date display format with
v
/
V
, then press
z
.
2
Select each item with
b
/
B
and set the numeric value with
v
/
V
.
3
Select [OK] with
B
, then press
z
.
To turn the power off
Press ON/OFF button.
• You can also turn the power off by closing the LCD panel.
[
To change the date and time
Press MENU and select [Clock Set] in
(Setup 2) (page 21).
[
To change the language
Press MENU and select [
Language] in
•
You can turn off the operation beeps by selecting [Beep] in
(Setup 1) (page 21).
/
:
/
1
LCD screen
1
ON/OFF button
z
button
v/V/b/B
button
MENU button
2
Control button
2
2
180 degrees (max.)
2
90 degrees (max.)
1
90 degrees (max.)
2
1
1
