
D
V
D
– V
a
ri
ous funct
ions
31
GB
Area code
To obtain the best possible surround sound, set
the speakers you have connected and their
distance from your listening position.
Then use the test tone to adjust the volume and
the balance of the speakers to the same level.
Setting the speakers
1
Press DVD SET UP in stop mode.
The Setup Display appears.
2
Press
M
or
m
repeatedly to select
“SPEAKER SETUP”, then press ENTER.
3
Press
M
or
m
repeatedly to select “SIZE”
or “DISTANCE”, then press ENTER.
4
Press
M
or
m
repeatedly to select the
setup item, then press ENTER.
5
Press
M
or
m
repeatedly to select or set
a setting, then press ENTER.
x
SIZE
When you do not connect center or surround
speakers, or you move the surround speakers, set
the parameters for CENTER, SURROUND and
SUBWOOFER. Since the front speaker setting
is fixed, you cannot change it.
* These settings are not available on European,
Russian and Latin American models.
Standard
Code number
Argentina
2044
Australia
2047
Austria
2046
Belgium
2057
Brazil
2070
Canada
2079
Chile
2090
China
2092
Denmark
2115
Finland
2165
France
2174
Germany
2109
Hong Kong
2219
India
2248
Indonesia
2238
Italy
2254
Japan
2276
Korea
2304
Malaysia
2363
Mexico
2362
Netherlands
2376
New Zealand
2390
Norway
2379
Pakistan
2427
Philippines
2424
Portugal
2436
Russia
2489
Singapore
2501
Spain
2149
Sweden
2499
Switzerland
2086
Taiwan
2543
Thailand
2528
United Kingdom
2184
Speaker settings
— SPEAKER SETUP
FRONT
YES
CENTER
YES: Normally select this position.
NONE: Select this when a center
speaker is not used.
SURROUND
YES: Normally select this.
BEHIND (LOW), BEHIND
(HIGH), SIDE (LOW), SIDE
(HIGH)*: Specify the position and
height to implement the Digital
Cinema Surround modes.
NONE: Select this when surround
speakers are not used.
SUBWOOFER NONE: Normally select this.
YES: Select this when an optional
sub woofer is used.
continued