Sony MHC-V77W, Руководство по эксплуатации

Страница: 30 / 64

30
US
MHC-V77W.US.4-695-546- 12 (1)
Compatible smartphones
Smartphones with a built-in NFC
function (OS: Android™ 2.3.3 or
later, excluding Android 3.x)
Note
•
•
The system can only recognizes and
connects to one NFC-compatible
smartphone at a time. If you try to
connect another NFC-compatible
smartphone to the system, the currently
connected NFC-compatible smartphone
will be disconnected.
•
•
Depending on your NFC-compatible
smartphone, you may need to perform
the following steps on your NFC-
compatible smartphone in advance.
— Turn on the NFC function. For details,
refer to the operating instructions of
the NFC-compatible smartphone.
— If your NFC-compatible smartphone
has an OS version that is older than
Android 4.1.x, download and start
the “NFC Easy Connect” application.
“NFC Easy Connect” is a free
application for Android smartphones
that can be obtained from Google
Play. (The application may not be
available in some countries/regions.)
1
Touch the smartphone to the
N-Mark on the unit until the
smartphone vibrates.
Complete the connection by
following the instructions displayed
on the smartphone.
When the BLUETOOTH connection is
established, the BLUETOOTH device
name appears on the display.
2
Start playback of an audio
source on the smartphone.
For details, refer to the operating
instructions of your BLUETOOTH
device.
Hint
If pairing and the BLUETOOTH connection
fail, do the following.
— Remove the case from the smartphone
if using a commercially available
smartphone case.
— Touch the smartphone to the N-Mark
on the unit again.
— Relaunch the “NFC Easy Connect”
application.
To terminate the BLUETOOTH
connection
Touch the smartphone to the
N-Mark on the unit again.
Setting the BLUETOOTH
audio codecs
You can enable AAC, LDAC or SBC
codec from BLUETOOTH device.
AAC/LDAC can be selected only
when the BLUETOOTH device
supports AAC/LDAC.
1
Press OPTIONS.
2
Press / repeatedly to select
“BT CODEC”, then press
.
3
Press / repeatedly to select
the setting, then press
.
•
•
“AUTO”: Enable reception in AAC
or LDAC codec format depending
on the BLUETOOTH device’s
capabilities.
•
•
“SBC”: Receive in SBC codec
format.
To exit the options menu, press
OPTIONS.