Sony MHC-V72D, Руководство по эксплуатации

Страница: 66 / 80

MHC-V82D/MHC-V72D.GB.5-000-538- 13(1)
66
GB
•
•
If there is equipment that
generates electromagnetic
radiation, such as a wireless LAN,
other BLUETOOTH device, or a
microwave oven nearby, move
them away.
•
•
Turn down the volume of the
connected BLUETOOTH device.
Apps Control
Voice Control does not work
properly.
• •
Speak closer to your smartphone/
iPhone microphone.
•
•
Speak clearly at a slower speed.
•
•
Reduce the surrounding noise.
Control for HDMI (“BRAVIA”
Sync)
The system does not turn on even
when the TV is turned on.
•
•
Hold down SHIFT and press
SETUP, then set [HDMI SETUP] –
[CONTROL FOR HDMI] to [ON]
(page 29). The TV must support
the Control for HDMI function
(page 42). For details, refer to
the operating instructions of your
TV.
•
•
Check the speaker settings of the
TV. The system power syncs with
the speaker settings of the TV.
For details, refer to the operating
instructions of your TV.
•
•
If the sound was output from the
TV’s speakers the previous time,
the system does not turn on even
when the TV is turned on.
The system turns off when the TV
is turned off.
•
•
The [STANDBY LINKED TO TV]
in [HDMI SETUP] is set to [ON]
(page 30), the system turns off
automatically when you turn off
the TV regardless of the input.
The system does not turn off even
when the TV is turned off.
•
•
To turn the system off
automatically regardless of the
input when you turn off the TV, set
[STANDBY LINKED TO TV] to [ON]
(page 30). The TV must support
the Control for HDMI function
(page 42). For details, refer to
the operating instructions of your
TV.
There is no picture/sound when
connected to the HDMI OUT (TV)
ARC connector.
•
•
Change the setting in [HDMI
SETUP] – [HDMI RESOLUTION]. The
problem may be solved.
•
•
The equipment connected to the
HDMI OUT (TV) ARC connector
does not conform to the audio
signal format. In this case, set
[HDMI SETUP] – [AUDIO(HDMI)] to
[PCM] (page 29).
• •
Try the following:
•
— Turn the system off and on
again.
•
— Turn the connected equipment
off and on again.
•
— Disconnect then connect the
HDMI cable again.
No TV sound is heard from the
system. “CODE 01” and “SGNL ERR”
appear on the display.
•
•
This system supports 2-channel
Linear PCM formats only. Check
the audio output setting on the
TV and change it to PCM output
mode if automatic mode is
selected. For details, refer to the
operating instructions of your TV.
•
•
Check that the speaker output
setting on the TV is set to use
external speakers.