Sony MHC-V71, Руководство по эксплуатации

Страница: 57 / 64

MHC-V71.US.4-735-851- 11 (1)
Additional Inf
orma
tion
57
US
•
•
Install a noise filter (not supplied)
to the AC power cord (mains lead).
•
•
Turn off surrounding electrical
equipment.
“PARTY LOCK” appears when you
touch any key on the unit.
•
•
Set the Party Lock function to off
(page 51).
Wired Party Chain, Wireless
Party Chain and Speaker Add
Wired Party Chain function cannot
be activated.
•
•
Check the connections
(page 36).
•
•
Make sure the audio cables are
connected correctly.
“PARTY CHAIN” is flashing on the
display.
•
•
You cannot select AUDIO IN
function if you make connection

(page 37) during Wired
Party Chain function. Select other
function (page 39).
•
•
Touch and hold PARTY CHAIN on
the unit.
•
•
Turn off the system, then turn it
back on again.
Wired Party Chain function does
not work properly.
•
•
Turn off the system. Then, turn
it back on again to activate the
Wired Party Chain function.
BLUETOOTH device cannot be
connected to the system during
Wireless Party Chain function.
•
•
After connecting all the systems,
perform the pairing and
connecting operations between
the BLUETOOTH device and the
Party Host.
BLUETOOTH device cannot be
connected to the system during
Speaker Add function.
•
•
After connecting two same model
systems, perform the pairing and
connecting operations between
the BLUETOOTH device and the
Party Host.
Resetting the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the keys on the touch panel of
the unit to perform this operation.
1
Unplug the AC power cord (mains
lead), then plug it back in.
2
Press

to turn on the system.
3
Touch and hold GUITAR and
MEGA BASS for about 3 seconds.
“RESET” appears on the display.
After the reset completes, the
system automatically reboots. Press

to turn on the system.
All BLUETOOTH pairing information
and user-configured settings, such
as preset radio stations are reset to
factory default setting.
Messages
One of the following messages may
appear or flash on the display during
operation.
CANNOT PLAY
A disc that cannot be played back
was inserted.
DATA ERROR
• •
The file is created in unsupported
format.
•
•
The file extensions does not match
the file format.