
model name [MHC-V4D]
[4-540-486-
12
(1)] GB
37
GB
filename[D:\NORM'S JOB\SONY HA\SO140051\MHC-V4D_PMRF
02\4540486121_GB\070TUN.fm]
masterpage:Right
Blu
e
tooth
To disconnect the
Bluetooth
device
Press BLUETOOTH on the unit.
“BT AUDIO” appears in the display
panel.
Depending on the
Bluetooth
device, the
Bluetooth
connection may be canceled
automatically when you stop playback.
Use the buttons on the unit to perform this
operation.
1
Press BLUETOOTH to select
Bluetooth
function.
“BT AUDIO” appears in the display
panel.
If the system is connected to a
Bluetooth
device, the
Bluetooth
device
name appears in the display panel.
Press BLUETOOTH to disconnect the
Bluetooth
device.
2
Hold down
X
and DJ EFFECT
for
about 3 seconds.
“BT HIST CLEAR” appears in the
display panel and all the pairing
information is erased.
Setting the
Bluetooth
standby mode
The
Bluetooth
standby mode enables the
system to turn on automatically when you
establish the
Bluetooth
connection from a
Bluetooth
device.
1
Press OPTIONS.
2
Press
/
repeatedly to select
“BT STBY”, then press
.
3
Press /
repeatedly to select
“ON” or “OFF”, then press
.
4
Press
"/1
to turn off the system.
When
Bluetooth
standby mode is set to
on, the system waits for a
Bluetooth
connection even when the system has
been turned off. When a
Bluetooth
connection is established, the system
turns on automatically.
Setting the
Bluetooth
signal
You can connect to the system from a
paired
Bluetooth
device in all functions
when
Bluetooth
signal is set to on. The
Bluetooth
signal is turned on by default.
Use the buttons on the unit to perform this
operation.
Hold down
X
and
+ for about
3 seconds.
“BT ON” or “BT OFF” appears in the
display panel.
Notes
• You cannot perform the following operations
when
Bluetooth
signal is set to off:
– Pairing with
Bluetooth
device
– Erasing the pairing information
– Using “SongPal” via
Bluetooth
• When the
Bluetooth
signal is set to off, this
system cannot be detected and connection
cannot be established from
Bluetooth
device.
• If you touch the system with an NFC-
compatible smartphone or set the
Bluetooth
standby mode to on, the
Bluetooth
signals will
set to on automatically.
Erasing all the pairing
registration information