background image

38

US

MHC-V21.US.4-736-607-

12

(1)

  Press W.PARTY CHAIN on the 

unit.
“CHAINING” flashes on the 
display. The system enters the 
Wireless Party Chain mode.

When the system entered Wireless 
Party Chain setup mode, connection 
to the BLUETOOTH device is 
terminated automatically.

Set the second system as a Party 
Guest.

  Press BLUETOOTH on the unit to 

select the BLUETOOTH function.

  Press W.PARTY CHAIN on the 

unit.
The second system becomes a 
Party Guest.
“P.CHAIN” lights up on the 
display.

Note

The Wireless Party Chain function is 
canceled in the following situations.

 

— There is no operation within 

1 minute after the Party Host is set 

in step 2.

 

— W.PARTY CHAIN is pressed again 

on the Party Host before step 3 is 

completed.

Set the third or more systems as 
Party Guests.

Repeat step 3.

Note

Connect the third or later systems 
within 30 seconds of connecting the 
previous system. “P. CHAIN” flashes 
on the display of the Party Host within 
30 seconds. After 30 seconds, the 
system cannot be connected.

Wait 30 seconds after the last 
Party Guest is connected.

“P.CHAIN” will stop flashing on the 
display of the Party Host and the 
BLUETOOTH device will reconnect to 
the Party Host.

Start playback on the connected 
BLUETOOTH device.

Adjust the volume.

When the volume on the Party Host 
is adjusted, the volume on Party 
Guests are also adjusted. If you 
want to adjust the volume on a 
particular Party Guest, adjust the 
volume on that Party Guest.

Note

You cannot select another system as 
the new Party Host while the Wireless 
Party Chain is activated.

When you use the microphone or play 
the guitar on Party Host, the sound will 
not be output from Party Guests.

Sleep Timer and Auto Standby functions 
are not available on Party Guests.

For detailed operation on other 
systems, refer to the operating 
instructions of the systems.

Hint

To add new Party Guests after Wireless 
Party Chain has already been established, 
hold down W.PARTY CHAIN on the Party 
Host, then repeat step 3 of “Setting up 
and enjoying the Wireless Party Chain”
 
(page 37).

To deactivate the Wireless Party 
Chain

Press W.PARTY CHAIN on the Party 
Host.

Note

When you change the function or turn off 
the Party Host, the Wireless Party Chain 
will be deactivated. 

Содержание MHC-V21

























































Отзывы: