Sony MHC-NXM1, Руководство по эксплуатации

Страница: 18 / 80

18
GB
Tips
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• If you select both sides recording and the tape
reaches the end of the front side part-way through a
track, the entire track is recorded again from the
beginning of the reverse side.
You can record just the portions you like from a
CD, tape or radio program on a tape.
You can also record from connected
components (see “Hooking up optional
components” on page 25).
Use buttons on the unit for the operation.
1
Load a recordable tape into deck B.
2
Press TAPE A/B to select deck B, then
press
nN
repeatedly to select
recording side. And press
x
to stop
playback.
3
Press PLAY MODE on the remote
repeatedly to select “
g
” to record on
one side. Select “
j
” (or “RELAY”) to
record on both sides.
4
Press one of the following buttons to
select the desired source to record.
• CD: To record from this system’s CD
player.
• TAPE A/B: To record from this system’s
tape deck A.
• TUNER/BAND: To record from this
system’s tuner.
• VIDEO/MD: To record from the optional
component connected to the VIDEO/MD
IN jacks.
5
Press
z
START.
Deck B stands by for recording.
“REC” flashes.
6
Press
z
START, then start playing the
desired source to record.
Recording starts.
Other operations
Recording on a tape
manually
— Manual Recording
To Do this
Stop recording Press
x
.
Pause recording Press
z
START on the unit.