Sony MHC-GZX33D, Руководство по эксплуатации

Страница: 35 / 64

model name [MHC-GZX88D/GZX55D/GZX33D]
[4-449-370- 12 (2)] GB
35
GB
filename[D:\NORM'S JOB\SONY HA\SO130014\MHC-GZX88D_55D_33D (PMRF
02)\4449370122_GB\070TUN.fm] masterpage:Right
T
une
r
Notes on transferring
• While transferring (except analog transfer),
no sound is output.
• CD-TEXT information is not transferred in
the created MP3 audio files.
• The transfer stops automatically if:
– the USB device runs out of space during
transfer.
– the number of audio files or folders on the
USB device reaches the limit.
• If a folder or file that you are trying to transfer
already exists on the USB device with the
same name, a sequential number is added after
the name without overwriting the original
folder or file.
• You cannot perform the following operations
during a transfer:
– Eject the disc.
– Select another track or file.
– Pause playback or find a point in the track or
file.
– Change the function or tuner band.
• When transferring music to a Walkman
®
using “Media Manager for WALKMAN”, be
sure to transfer in MP3 format.
• When connecting a Walkman
®
to the system,
be sure to connect after the display “Creating
Library” or “Creating Database” on the
Walkman
®
has disappeared.
Listening to the radio
1
Press FUNCTION repeatedly to
select FM or AM band.
2
For automatic scanning:
Hold down /– until the
frequency indication changes and then
release. “AUTO” lights up in the
display panel.
Scanning stops automatically when a
station is tuned in. “TUNED” and
“ST” (for FM stereo programs only)
light up in the display panel.
If “TUNED” does not light up and
scanning does not stop, press
x to stop
scanning. Then, perform manual
tuning (below).
When you tune to an FM station that
provides RDS services, information
such as the service name or station
name is provided by broadcasts.
You can check the RDS information
by pressing DISPLAY repeatedly.
For manual tuning:
Press /– repeatedly to tune
to the station you want.
For direct tuning:
Press D.TUNING, then press the
numeric buttons to enter the frequency
of the station you want. For example,
press 1, 0, 2, 5 and 0 to enter the
frequency of FM 102.50 MHz.
Press
. If you cannot tune in the
station, make sure you have entered
the right frequency used in your area.
To cancel direct tuning, press
D.TUNING again.
Tip
To reduce static noise on a weak FM stereo
station, hold down SHIFT, then press FM
MODE repeatedly until “MONO” lights up in
the display panel.
Tuner