Sony MHC-GT3D, Руководство по эксплуатации

Страница: 36 / 68

36 GB
filename[D:\NORM'S JOB\SONY HA\SO150006\MHC-GT3D (PMRF
03)\4562957132_GB (CEK)\060CDP.fm] masterpage:Left
model name [MHC-GT3D]
[4-562-957- 13 (2)] GB
Transferring music
You can transfer music from a sound
source to a USB device connected to
the (USB)
port.
The audio format of files transferred by
this system is MP3.

Do not remove the USB device during
transfer or erase operations. Doing so
may corrupt the data on the USB device
or damage the USB device itself.

MP3 files are transferred with the same
bit rate as the original files.

When transferring from TUNER FM,
AUDIO IN function, or an AUDIO CD, you
may select the bit rate before
transferring.

USB transfer and erase operations are
prohibited when the disc tray is opened.
Note on copyright-protected
content
The transferred music is limited to
private use only. Use of the music
beyond this limit requires permission
of the copyright holders.
To select USB memory
See page 25.
To select the bit rate
You can select a higher bit rate to
transfer music with better quality.
1
Press OPTIONS.
2
Press / repeatedly to select “BIT
RATE”, then press .
3
Press / repeatedly to select the
bit rate you want, then press .
 128 KBPS: encoded MP3 tracks
have smaller file size and lower
audio quality.
 256 KBPS: encoded MP3 tracks
have bigger file size but higher
audio quality.
To exit OPTIONS menu, press
OPTIONS.
You can transfer music to a USB device
connected to
(USB) port as follows:

Synchronized Transfer: Transfer all
supported music files from a disc to
USB.
 REC1 Transfer: Transfer a single track
or audio file during playback.
 Analog Transfer: Transfer sound from
TUNER FM or AUDIO IN function.
Use the buttons on the subwoofer to
perform this operation.
1
Connect a transferable USB device
to the
(USB) port.
2
For Synchronized Transfer and
REC1 Transfer:
Press FUNCTION, then turn the
MULTI CONTROL knob to select
“DVD/CD”, then press ENTER. If the
system starts playback
automatically, press

twice to stop
the playback.
For Analog Transfer:
Press FUNCTION, then turn the
MULTI CONTROL knob to select the
source (“TUNER FM”/”AUDIO IN”)
you want to transfer, then press
ENTER.
3
For Synchronized Transfer:
When playback is stopped, press
PLAY MODE on the remote control
repeatedly to select the play mode
you want.
USB Transfer
Notes
Transferring music from a
disc, or an analog audio
source