
34
GB
filename[D:\NORM'S JOB\SONY HA\SO150006\MHC-GT3D (PMRF
03)\4562957132_GB (CEK)\060CDP.fm]
masterpage:Left
model name [MHC-GT3D]
[4-562-957-
13
(2)] GB
[4:3 PAN SCAN]:
Selects this when you
connect a 4:3 screen TV without a wide
mode function. This setting displays a
full-height picture on the entire screen,
with trimmed sides.
[COLOR SYSTEM (VIDEO CD)]
(Except for Latin American, European,
and Russian models)
Selects the color system (PAL or NTSC).
[AUTO]:
Outputs the video signal
according to the color system of the
disc. Select this setting if your TV uses
a DUAL system.
[PAL]:
Outputs the video signal in PAL.
[NTSC]:
Outputs the video signal in
NTSC.
For details, see “Changing the color
system” (page 24).
[BLACK LEVEL]
(For Latin American models only)
Selects the black level (setup level) for
the video signals output from the
VIDEO OUT jack.
[ON]:
Sets the black level of the output
signal to the standard level.
[OFF]:
Lowers the standard black level.
Use this when the picture becomes too
white.
[PAUSE MODE]
[AUTO]:
The picture, including
subjects that move dynamically, is
output with no jitter. Normally select
this setting.
[FRAME]:
The picture, including
subjects that do not move
dynamically, is output in high
resolution.
[PHOTO EFFECT]
(JPEG files only)
[MODE 1]:
The image sweeps in from
top to bottom.
[MODE 2]:
The image sweeps in from
left to right.
[MODE 3]:
The image stretches out
from the center.
[MODE 4]:
The image randomly cycles
through the effects.
[MODE 5]:
The next image slides over
the current image.
[OFF]:
Off.
[PHOTO INTERVAL]
(JPEG files only)
[NORMAL]/[FAST]/[SLOW 1]/
[SLOW 2]:
Selects the slide show
duration. [SLOW 2] is slower than
[SLOW 1].
[AUDIO DRC]
(Dynamic Range Compression)
Useful for watching movies at low
volume late at night.
[OFF]:
Off.
[STANDARD]:
The dynamic range is
compressed as intended by the
recording engineer.
Setting the audio
options – [AUDIO
SETUP]