background image

Basic Operations

17

=

+

(

P

p

0

(

(

)

VOL +/–

=

/

+

TUNER/

BAND

2

Press 

§

 and place a CD.

Then press again to close the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP/
EX-CHANGE repeatedly so that it lights
green.

3

Press CD SYNC.

Deck B stands by for recording and the
CD player stands by for playback. The
indicator on TAPE B 

(

 (for front side)

lights up.

4

Press DIRECTION repeatedly to
select 

A

 to record on one side.

Select 

ß

 (or RELAY) to record on

both sides.

5

Press PAUSE.

Recording starts.

To stop recording

Press 

p

.

Tips

• If you want to record from the reverse side, press

TAPE B 

9

 to light its indicator after pressing CD

SYNC in step 3.

• When you record on both sides, be sure to start

from the front side.  If you start from the reverse
side, recording stops at the end of the reverse side.

Note

You cannot listen to other sources while recording.

With the label
side up.  When
you play a single
CD, place it on
the inner circle
of the tray.

Listening to the radio

–– Preset Tuning

Preset radio stations in the tuner's memory
first (see “Step 4: Presetting radio stations” on
page 10).

1/u

 (Power)

continued

VOLUME

+/–

TUNER/
BAND

Jog dial

Содержание MHC-GRX40AV













































Отзывы: