Ad
di
tiona
l Inf
o
rma
tion
81
GB
Main unit
Amplifier section
MHC-GNZ9D
The following measured at AC 120, 127, 220,
230 – 240 V, 50/60 Hz
Continuous RMS power output (reference)
Front speaker:
115 + 115 watts
(6 ohms at 1 kHz, 10%
THD)
Center speaker:
50 watts (6 ohms at 1 kHz,
10% THD)
Surround speaker:
50 + 50 watts
(6 ohms at 1 kHz, 10%
THD)
Subwoofer:
170 watts (4 ohms at
100 Hz, 10% THD)
MHC-GNZ8D
The following measured at AC 120, 127, 220,
230 – 240 V, 50/60 Hz
Continuous RMS power output (reference)
Front speaker:
100 + 100 watts
(6 ohms at 1 kHz, 10%
THD)
Center speaker:
40 watts (6 ohms at 1 kHz,
10% THD)
Surround speaker:
40 + 40 watts
(6 ohms at 1 kHz, 10%
THD)
MHC-GNZ7D
The following measured at AC 120, 127, 220,
230 – 240 V, 50/60 Hz
Continuous RMS power output (reference)
100 + 100 watts
(6 ohms at 1 kHz, 10%
THD)
MHC-GNZ5D
The following measured at AC 120, 127, 220,
230 – 240 V, 50/60 Hz
Continuous RMS power output (reference)
50 + 50 watts
(6 ohms at 1 kHz, 10%
THD)
Inputs
TV/SAT IN (audio) (phono jacks)
1)
:
voltage 450/250 mV,
impedance 47 kilohms
VIDEO INPUT VIDEO (phono jack)
1)
:
1 Vp-p, 75 ohms
VIDEO INPUT AUDIO (phono jacks)
1)
:
voltage 250 mV,
impedance 47 kilohms
MIC 1/MIC 2/MIC
2)
(phone jacks):
sensitivity 1 mV,
impedance 10 kilohms
Outputs
TV/SAT OUT (audio) (phono jacks)
1)
:
voltage 250 mV,
impedance 1 kilohm
VIDEO OUT (phono jack):
max. output level
1 Vp-p, unbalanced, Sync
negative, load impedance
75 ohms
S VIDEO OUT (4-pin/mini-DIN jack)
1)
:
Y: 1 Vp-p, unbalanced,
Sync negative,
C: 0.286 Vp-p, load
impedance 75 ohms
COMPONENT VIDEO OUT
1)
:
Y: 1 Vp-p, 75 ohms
P
B
, P
R
: 0.7 Vp-p, 75 ohms
DIGITAL OPTICAL OUT
3)
(Square optical connector
jack, rear panel)
Wavelength
660 nm
PHONES (stereo mini jack):
accepts headphones of
8 ohms or more
FRONT SPEAKER:
Use only the supplied
speaker SS-GNZ9D.
SURROUND SPEAKER
4)
:
Use only the supplied
speaker SS-RS9D for
MHC-GNZ9D, SS-RS8D
for MHC-GNZ8D.
CENTER SPEAKER
4)
:
Use only the supplied
speaker SS-CT9D for
MHC-GNZ9D, SS-CT8D
for MHC-GNZ8D.
SUBWOOFER/SUBWOOFER CONTROL
5)
:
Use only the supplied
speaker SA-WG9D.
SUBWOOFER OUT
6)
voltage 1 V,
impedance 1 kilohm
1)
Except for MHC-GNZ5D
2)
MHC-GNZ5D only
3)
MHC-GNZ7D/GNZ5D only
4)
MHC-GNZ9D/GNZ8D only
5)
MHC-GNZ9D only
6)
MHC-GNZ8D/GNZ7D only
Specifications
continued