Disp
la
y
63
GB
Other operations
Notes
• You cannot activate the Play Timer and Rec Timer at
the same time.
• If you use the Rec Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• The system turns on 30 seconds before the preset
time. Do not operate the system from the time the
system turns on until the play starts.
• If the system is on or “STANDBY” is blinking in the
display 30 seconds before the preset time, the Rec
Timer will not be activated.
• The volume is reduced to minimum during
recording.
The demonstration display (display window
flashing even when the system power is off) and
the clock display can be turned off to minimize
the amount of power consumed during standby
(Power Saving Mode).
Press DISPLAY repeatedly while the
system is off until the demonstration
display or the clock display disappears.
To cancel Power Saving Mode
Press DISPLAY while the system is off. Each
time you press the button, the display switches
cyclically as follows:
Demonstration display
t
Clock display*
t
No display (Power Saving Mode)
* The clock is displayed only if you set the clock.
Tips
• The timer continues to operate in Power Saving
Mode.
•
?/1
indicator lights up even in Power Saving Mode.
Press ILLUMINATION on the unit.
Each time you press the button, the power
illuminator changes cyclically as follows:
PATTERN 1
t
PATTERN 2
t
PATTERN 3
t
PATTERN OFF
To
Do this
Check the setting
1
Press TIMER MENU.
2
Press
M
or
m
repeatedly
until “TIMER SELECT”
appears, then press ENTER.
3
Press
M
or
m
repeatedly
until “REC SELECT”
appears, then press ENTER.
Change the setting
Start over from step 1.
Cancel the timer
1
Press TIMER MENU.
2
Press
M
or
m
repeatedly
until “TIMER SELECT”
appears, then press ENTER.
3
Press
M
or
m
repeatedly
until “TIMER OFF” appears,
then press ENTER.
Display
Turning off the display
— Power Saving Mode
Changing the Power
illuminator
(Except for MHC-GNZ5D)
