model name [MHC-GN1300D]
[4-132-091-
14
(2)] GB
80
GB
filename[D:\NORM'S JOB\SONY HA\SO0163\MHC-GN1300D_PMRF
01\4132091142_GB\GB110TIM.fm]
masterpage:Left
Changing the display
Use the buttons on the unit for the
operation.
1
Press OPTIONS.
2
Turn OPERATION DIAL to select
the item you want, then press
ENTER.
ILLUM
Change the illumination pattern
around MASTER VOLUME.
BACKLIGHT
Change the meter backlight pattern.
POINTER
Change the meter pointer pattern.
DISPLAY
Change the front panel display pattern.
3
Turn OPERATION DIAL to select
the setting you want.
4
Press ENTER.
5
Repeat steps 2 to 4 to make
other settings.
To exit the OPTIONS menu
Press OPTIONS again.
Press DISPLAY repeatedly while
the system is turned off.
You can select the following display
mode.
Demonstration
The display changes and the indicators
flash even when the system is turned off.
No display (Power Saving Mode)
*
The display is turned off to conserve
power. The timer and clock continue to
operate.
Clock
The clock is displayed. The clock display
automatically turns to Power Save Mode
after a few seconds.
* You cannot perform the following operations
during Power Saving Mode:
– Setting the clock (page 23).
– Changing the AM tuning interval (page 53).
– Turning on the system by pressing DVD,
, TV/SAT, TUNER/BAND, TAPE or
VIDEO on the unit.
– Changing the color system (page 19).
You can easily view the information
through the meter display such as the
music source level.
To select a preset display pattern
Press METER MODE repeatedly to
select the preset display pattern
you want.
Front panel display, meter display and
power illuminator will change according
to the preset pattern you have selected.
Changing the front panel
display mode
Using the Meter Display
USB