Sony MFS-2000 Скачать руководство пользователя страница 85

Страница: 85 / 200

Cha

r 5

c Op

tio

Composing Video With Keys

In the Key >M/E Key1 >Main menu

(see page 77)

, press [Mask].

A popup window appears.

Press one of the following.

Off:

Do not mask.

Key Mask:

This masks out a part of the key, which will result in the

background appearing.

Bkgd Mask:

This masks out a part of the background, which will result in

the key fill appearing.

The popup window closes.

To make detailed mask settings, see “Setting Key Mask Shapes and
Positions” (page 109).

Moving a Key Over or Under

To check whether a key is over or under

There are OVER indicators in the M/E transition control block, located over
key1 and key2. The key whose OVER indicator is lit is the key on top.

To move a key over or under from menus

The following procedure shows how to move key1 on the M/E bank. The same
operations can be used to move the other keys as well (key 2, and downstream
keys 1 and 2).

In the Key >M/E Key1 >Main meu

(see page 77)

, press [Key Priority].

A popup window appears.

Key mask

Masked area

(box)

Background mask

Содержание MFS-2000









































































































































































































Результаты поиска

Содержание MFS-2000

Отзывы:

Похожие инструкции для MFS-2000

Бренды по названию

Популярные бренды

Sony MFS-2000, Руководство пользователя

Результаты поиска

Содержание MFS-2000

Отзывы:

Похожие инструкции для MFS-2000

Бренды по названию

Популярные бренды