Sony MFS-2000 Скачать руководство пользователя страница 150

Страница: 150 / 200

hap

r 8

ce
O

perat

ions

150

Controlling External Devices

Do one of the following to select the file to load.

• Press directly on the list in the status area.
• Use the arrow buttons to scroll the reverse video

cursor.

• Turn the knob.

a)Disk recorder
b)Extended VTR

Press [File Load].

The selected file is loaded, and its name appears at the
top of the status area.

Creating new files (disk recorders only)

From the top menu, select Misc >DDR/VTR >File
List.

The File List menu appears. The upper part of the
status area shows the device number of the currently
selected device, and the currently loaded file. The
lower part of the status area shows the currently loaded
file list.

Disk recorder set to Recorder

Note

File update dates are not displayed for disk recorders
using the Video Disk Communications Protocol.

Turn the knob to select the device on which to create
the new file.

Note

You will not be able to create a file if you select a disk
recorder that is being used as a player.

Press [New File].

The keyboard window appears.

Enter a file name and press [Enter].

The maximum file name length is as follows.

Disk recorder (Sony Disk 9-pin Protocol):

characters

Disk recorder (Video Disk Communications

Protocol):

8 characters

The new file name appears at the top of the status area.

When the loaded file is not a target for recording

Press [File Unload].
The current file name at the top of the status area is
cleared.

Knob

Description

Setting values

2 (List No)

File number

1 and upwards

0 and upwards

Knob

Description

Setting values

1 (DEV)

Device number

1 to 6

Содержание MFS-2000









































































































































































































Результаты поиска

Содержание MFS-2000

Отзывы:

Похожие инструкции для MFS-2000

Бренды по названию

Популярные бренды

Sony MFS-2000, Руководство пользователя

Результаты поиска

Содержание MFS-2000

Отзывы:

Похожие инструкции для MFS-2000

Бренды по названию

Популярные бренды