Sony MFS-2000, Руководство пользователя

Страница: 138 / 200

Ch
ap
te
r
7
File
Op
er
at
ion
s
138
Batch Operating on Data Files
“1 SYSTEM” is specified as the target directory. (No
other directory can be selected.)
3
Press the button for the desired media type (Hard Disk,
or Memory Stick).
The color of the pressed button is inverted.
4
Press [OK].
The popup window closes.
5
In the File >All menu, press [All Save].
A confirmation window appears asking if you want to
execute the save.
6
Press [Yes] in the confirmation window to execute the
save, or [No] to cancel it.
If you pressed [Yes], the save begins and a window
opens to show its progress.
Note that all existing files in the save destination are
deleted before the save starts.
To cancel a save after it has started
Press [Cancel] in the progress window, and press [OK]
in the message box which appears to inform you that
the save has been cancelled.
Loading All Data at Once
You can load the data of all categories saved in files to
registers in a single operation.
Note
Data cannot be loaded from files created or saved on
systems other than the MFS-2000.
1
Carry out steps 1 to 4 in “Saving All Data at Once”
(see page 137) , to select the type of media storing the
data you want to load.
2
In the File >All menu, press [All Load].
A confirmation window appears asking if you want to
execute the load.
3
Press [Yes] in the confirmation window to execute the
load, or [No] to cancel it.
If you pressed [Yes], the load begins and a window
opens to show its progress.
Note that all existing data in the load destination
registers are deleted before the load starts.
To cancel a load after it has started
Press [Cancel] in the progress window, and press [OK]
in the message box which appears to inform you that
the save has been cancelled.
Deleting All Data at Once
You can delete the data of all categories saved in files in a
single operation.
1
Carry out steps
1
to
4
of “Saving All Data at Once”
(see page 137) , to select the type of media storing the
data you want to delete.
2
In the File >All menu, press [All Delete].
A confirmation window appears asking if you want to
execute the deletion.
3
Press [Yes] in the confirmation window to execute the
deletion, or [No] to cancel it.
If you pressed [Yes], the deletion begins and a window
opens to show its progress.
To cancel the data deletion after it has started
Press [Cancel] in the progress window, and press [OK]
in the message box which appears to inform you that
the deletion has been cancelled.